Functional Description; Specifications - Milwaukee 0730-20 Operator's Manual

Hide thumbs Also See for 0730-20:

Operator's manual (26 pages)

Operator's manual (16 pages)

Operator's manual (33 pages)

Table of Contents

If the guard and the spring are not operating

Lower guard may operate sluggishly due to dam-

aged parts, gummy deposits, or a build-up of

debris.

only for special cuts such as "plunge cuts"

and "compound cuts." Raise lower guard by

retracting handle and as soon as blade enters the

material, the lower guard must be released. For

all other sawing, the lower guard should operate

automatically.

ering the blade before placing saw down on

An unprotected, coasting blade will

cause the saw to walk backwards, cutting whatever

is in its path. Be aware of the time it takes for the

blade to stop after switch is released.

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to cause

cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

masonry products, and

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per

Minute (RPM)

Underwriters Laboratories, Inc.

United States and Canada

Cat. No. Volts DC No Load RPM

0730-20

Use only MILWAUKEE M28™ or V28

These carry

SPECIFICATIONS

4200

6-1/2"

battery packs.