Milwaukee M18 FUEL 2729-20 Operator's Manual
Deep cut band saw
Hide thumbs
Also See for M18 FUEL 2729-20:
- Operator's manual (17 pages) ,
- Operator's manual (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for Milwaukee M18 FUEL 2729-20
Summary of Contents for Milwaukee M18 FUEL 2729-20
- Page 1 OPERATOR'S MANUAL Cat. No. 2729-20 M18™ FUEL™ DEEP CUT BAND SAW WARNING To reduce the risk of injury, user must read and understand operator's manual.
- Page 2 GENERAL POWER TOOL • turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING • Do not overreach. Keep proper footing and tions provided with this power tool.
- Page 3 It is not possible to anticipate every Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained • These carry...
- Page 4 Adjusting the 3-Position Material Guide WARNING recommended for this tool. Others Blades and Blade Selection LED Worklight The LED worklight is turned on automatically when OPERATION use a blade with the correct pitch (teeth per inch) for WARNING changing or removing accesso- The following suggestions are for selecting the right To reduce the risk of injury, wear safety goggles or glasses with side shields.
- Page 5 MILWAUKEE If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on...
Need help?
Do you have a question about the M18 FUEL 2729-20 and is the answer not in the manual?
Questions and answers
How to adjust blade tracking