4-10. Fuel Consumption; 4-11. Generator Power Curve - Miller Bobcat 260 Owner's Manual

4-10. Fuel Consumption

14-11. Generator Power Curve

4-11. Generator Power Curve

300 150
250 125
200 100
150 75
100 50
50 25
0
0
0 20 40
0 10 20
OM-286504 Page 20
�
Complete Parts List is available at www.MillerWelds.com
Complete Parts List available at www.MillerWelds.com
EFI ENGINE
CARB ENGINE
60 80 100 120 140
AC AMPS AT 120 V
30 40 50 60 70
AC AMPS AT 240 V
The generator power curve shows
the generator power in amperes
available at the receptacles.
160 180 200 220 240
80 90 100 110 120
254 017-A
On a typical job using 1/8 in. 7018 electrodes
(125 amps, 20% duty cycle), expect about
20 hours of operation (22 hours with EFI
engine).
Welding at 150 amps at 40% duty cycle uses
approximately 3/4 gallon per hour. Expect
about 16 hours of operation with carbureted
engine (18 hours with EFI engine).
The generator power curve shows the gener-
ator power in amperes available at the
receptacles.