Warnings And Safety; Burner Identification; Basic Safety Rules - Riello 901T Installation, Use And Maintenance Instructions

9

Warnings and safety

The dimension of the boiler's combustion chamber must respond
to specific values, in order to guarantee combustion with the low-
est polluting emissions rate.
We therefore recommend you consult the Technical Service De-
partment before choosing this type of burner for work in conjunc-
tion with a certain generator. Qualified personnel is that with the
professional and technical requirements indicated by Law no. 46
dated 5 March 1990.
The commercial organisation has a widespread network of agen-
cies and technical offices whose personnel participate periodical-
ly in training and refresher courses at the Company Training
Centre.
This burner must only be used for the application it was designed
for.
The manufacturer accepts no liability within or without the con-
tract for any damage caused to people, animals and property due
to installation, adjustment and maintenance errors or to improper
use.
9.1

Burner identification

The Identification Plate on the product gives the serial number,
model and main technical and performance data. If the Identifica-
tion Plate is tampered with, removed or missing, the product can-
not be clearly identified, thus making any installation or
maintenance operation difficult or potentially dangerous.
9.2

Basic safety rules

 Children or unskilled persons must not use the appliance.
 Under no circumstances the suction line grids or the dissipa-
tion grids in the installation room must be covered with
cloths, paper or any other material.
 Unauthorised persons must not attempt to repair the appli-
ance.
 It is dangerous to pull or twist the electric cables.
 Do not perform any cleaning operation if the appliance is not
disconnected from the main power supply.
 Do not clean the burner or its parts with inflammable sub-
stances (e.g. petrol, alcohol, etc.). The cover must be
cleaned with soapy water.
 Do not place anything on the burner.
 Do not block or reduce the size of the ventilation vents in the
installation room.
 Do not leave containers and inflammable products in the
installation room.
20028767
Warnings and safety
24 GB