Using The 2-In-1 Air Purifier&Humidifier; Switching The Working Mode - Philips AC3737 User Manual

4 Launch the "Air+" app and click on "Connect a New Device" or press the "+" button on the top of
the screen. Follow the onscreen instructions to connect the appliance to your network.
Note:
• This instruction is only valid when the appliance is being set up for the first time. If the network has
changed or the setup needs to be performed again, see Chapter "Reset the Wi-Fi connection" on
page 6.
If you want to connect more than one appliance to your smartphone or tablet, you have to do this
•
one by one.
• Make sure that the distance between your smartphone or tablet and the appliance is less than 10 m
without any obstructions.
Reset the Wi-Fi connection
Note:
Reset the Wi-Fi connection when your default network has changed.
•
1
Put the plug of the appliance in the power socket and tap
2
Tap and hold
The appliance goes to pairing mode.
»
The Wi-Fi indicator
»
3 Follow the steps 3-4 in "Setting up the Wi-Fi connection for the first time" section.
4 Using the 2-in-1 Air Purifier&Humidifier
Switching the working mode
Note: To rapidly improve the air quality, it's recommended to use the Purification ONLY mode.
The appliance has two working modes: 2-in-1 mode and Purification ONLY mode.
2-in-1 mode (
•
• Purification ONLY mode: After removing the water tank, the appliance goes to the this mode
automatically.
Note: Once you have placed the water tank correctly, ensure that the transparent window of the water
tank is aligned with the display panel on the same side.
EN
6
for 3 seconds until you hear a beep.
blinks orange.
):The water tank is correctly placed on the purifier.
to turn on the appliance.