Avoid placing the power cord from traffic area and arrange near the place where will not be • tripped over. If the power cord is damaged, you must have it replaced by Philips, a service center authorized by • Philips, or similarly qualified persons in order to avoid a hazard.
The noise emission sound pressure level is below 70dB(A). • Electromagnetic.fields.(EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Recycling Do not throw away the product with the normal household waste at the end of its life, but hand it in at an official collection point for recycling.
Your air purifier Congratulations on your purchase of air cleaner AC3055/AC3059. To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product overview Control panel Air outlet Particle sensor Gas sensor NanoProtect filter Series 3 (FY3430/30)
Corporate/Enterprise networks (e.g. certificates, network profiles) are not supported. We • recommend setting up the Philips Air Purifiers on a dedicated network created for IoT devices or WPA2-Personal networks. Configuration details are provided in the Clean Home+ app (e.g. Mac address) to help set-up on •...
Make sure that the distance between your smartphone or tablet and the air purifier is less than 10 m without any obstructions. • This App supports the latest versions of Android and iOS. Please check www.philips.com/cleanhome for the latest update of supported operating systems and devices. Reset.the.Wi-Fi.connection Note: •...
Gas level Air quality light color With an advanced gas sensor, a display ranging from L1 to L4 Blue shows the level change of potential harmful gases (incl. VOC, odor, etc.) detected. L1 indicates best air quality. Blue-purple Purple-red Turning.on.and.off Note: •...
Changing the night mode setting You can choose normal Sleep mode or Allergy Sleep mode by touching the button. Normal Sleep mode: In normal Sleep mode, the air purifier operates quietly at a low speed. After • 3 seconds, the button dims, all lights and buttons are off.
With the light sensor, the control panel can automatically turn on, turn off or dim according to the • ambient light. The control panel will be off or dim when the ambient light is dark. You can touch any button to wake up all lights. Then, if no further operation, all lights will be off or dim again to match with the ambient light.
Cleaning and maintenance Note: Always unplug the appliance before you clean it. • Never immerse the appliance in water or any other liquid. • Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any •...
Cleaning.the.surface.of.the.filter. Filter.alert.light.status Action Clean the surface of the filter The filter cleaning alert displays with a vacuum cleaner. on the screen. Switch off the air purifier and unplug from the power socket. Pull the back cover and remove it from the appliance. Pull the filter from the appliance.
Page 15
Replacing.the.filter Note: The filter is not washable or reusable. • Always turn off the air purifier and unplug from the electrical outlet before replacing the filter. • Filter.alert.light.status Action Replace the NanoProtect filter Series The filter replacement alert 3 (FY3430/30) lights up Switch off the air purifier and unplug from the power socket.
Filter.reset You can replace the filter even before filter replacement alert ( ) displays on the screen. After replacing a filter, you need to reset the filter lifetime counter manually. Touch the power button for 3 seconds to turn off the appliance and unplug from power socket. Put the power plug in the power socket.
The first few times you use the appliance, it may produce a plastic smell. This is normal. However, if the appliance produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips The appliance produces service center.
Page 18
Problem Possible solution • It's normal if the appliance runs at the Turbo mode. • In the Auto mode, if the appliance is too loud, maybe the appliance runs at high speed because air quality becomes worse, or your personalized setting in App triggers a higher fan speed.
Philips dealer. Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support� If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your...
Need help?
Do you have a question about the AC3055 and is the answer not in the manual?
Questions and answers