Setting Target Humidity; Display Switch - Philips AC3737 User Manual

Setting target humidity
Tap the button to set the target humidity level to 40%, 50%, 60% or ---.
If you have not set a humidity level, the default target humidity is 50%.
»
When the ambient humidity reaches the target level, the appliance will automatically switch
»
to the lowest fan speed. If the humidification sensor detects that the current humidity drops
below the target level, the appliance will switch back to the previous fan speed automatically.
The "---" display indicates that no humidity is set, and the appliance will continue to humidify
»
the air until the RH (Relative Humidity) level reaches 70%.
After removing the water tank, the appliance goes to the Purification ONLY mode
»
automatically and you can't set the humidity level. Tap the
Display switch
2-in-1 mode (
•
IAI (Indoor Allergen Index) and current humidity.
The appliance displays the current humidity by default.
»
Purification ONLY mode: Tap the
•
The appliance displays the PM2.5 level by default.
»
): Tap the button to switch to view PM2.5 (particles smaller than 2.5 microns),
1
button to switch between PM2.5 and IAI levels.
button, blinks on the screen.
2
EN
9