Page 1
All manuals and user guides at all-guidesbox.com Mod. 1083 DS1083-137 LBT20922 Interactive Links LIaaaaaaaaaaaa SYSTEM BOOKLET Max. 32 apartment stations Max. 32 apartment stations per column per column calling stations 2Voice column 2Voice column power supply unit power supply unit calling stations column...
All manuals and user guides at all-guidesbox.com Interactive Links The document contains INTERACTIVE LINKS for faster and more efficient consultation. INDEX 1. GENERAL CHARACTERISTICS AND INSTALLATION TYPES USING ONLY COLUMN POWER SUPPLY UNIT REF. 1083/2 ......................3 2. SYSTEM TYPOLOGIES ..........................
All manuals and user guides at all-guidesbox.com The 2Voice video door phone system is easy to install. Only two non-polarised wires are needed to interconnect all system devices. It is modular and suitable for making from one- and two-family systems to large systems of various types (audio, video and mixed) and provide the best solution for all needs.
All manuals and user guides at all-guidesbox.com • Five door phone call tones (selectable by the user). • Differentiated rings on same call tones according to origin (from main, from secondary, from intercom apartment station, from switchboard). • Cyclic auto-on function for calling stations and surveillance camera stream (for calling stations with correct setup only). • Calls to concierge switchboard.
Page 5
All manuals and user guides at all-guidesbox.com Single column max. 2 risers 2 main stations LINE OUT LINE IN main ID = 1 LINE main 2Voice column column ID = 0 power supply unit distributor ID = n Up to 12 columns 1 main calling station and 2 secondary stations for each column LINE OUT LINE OUT secondary...
Page 6
All manuals and user guides at all-guidesbox.com 12 columns 2 main calling stations and 2 secondary stations for each column LINE OUT LINE OUT LINE OUT secondary secondary secondary ID = n ID = n+1 ID = n+2 AUX dip 2 = 0 AUX dip 2 = 0 AUX dip 2 = 0 LINE IN...
Page 7
All manuals and user guides at all-guidesbox.com 12 columns 2 main calling stations and 2 secondary stations for each column, concierge switchboard LINE OUT LINE OUT LINE OUT secondary secondary secondary ID = n ID = n+1 ID = n+2 AUX dip 2 = 0 AUX dip 2 = 0 AUX dip 2 = 0...
All manuals and user guides at all-guidesbox.com SYSTEM OPERATION 3.1 CALL AND BUSY STATE MANAGEMENT The 2Voice system allows several conversations at the same time on different columns, in addition to a further conversation between main calling station and an apartment station belonging to any column not engaged by the conversation. The system works as follows when a call is made: • A call from a main call station switches all the other main calling stations and the entire column of the called apartment station to busy for a call pick-up time (max.
All manuals and user guides at all-guidesbox.com auto-on function either a video connection has been established or during the call pick-up time. – “Free”: the electric lock may be activated by pressing the door opening button on the call station if this is configured as main or if this configured as secondary and the user belongs to the same column as the calling station. This function is typically used for secondary stations. • When a door open command is received from the switchboard. Name tags, if powered by the ILL terminal of the apartment station will go out while the electric lock is actuated.
All manuals and user guides at all-guidesbox.com If there are several apartment stations in parallel, the extensions will ring in sequence. The user’s extension 0 will also switch the video door phone if the call comes from a video door phone station. In this case, during the call pick-up time (60s from the call), the video door phones of the other extensions can be switched on by pressing the auto-on button (video switching function) until one of the called user’s video door phones...
All manuals and user guides at all-guidesbox.com SYSTEM INSTALLATION 5.1 STANDARDS AND INTERFERENCE IMMUNITY All devices must be set up and wired according to rules of best practice and according to national installation standards. Particular attention must be devoted to power units and transformers: these must be arranged in suitable electric panels and equipped with appropriately dimensioned protection and circuit breaker switches.
Page 12
All manuals and user guides at all-guidesbox.com IMPORTANT! Refer to the maximum number of users and apartment stations in a video door phone configuration if the system configuration is mixed (door phone apartment stations + video door phone apartment stations). (*) The maximum number of devices is 16 in mixed configurations (apartment stations + distributors connected in in-out mode in the column).
All manuals and user guides at all-guidesbox.com 5.3 SYSTEM POWER The following must be taken into consideration for calculating the number of power supply units in the system: • Single column system with 2 door units and 32 name tags each, up to 56 apartment stations, 1 column distributor or column interface: 1 power supply unit.
All manuals and user guides at all-guidesbox.com Max. 32 apartment Max. 32 apartment stations per column stations per column LINE OUT LINE OUT LINE IN LINE IN LINE LINE LINE IN LINE OUT LINE IN LINE OUT 2Voice column column 2Voice column column power supply...
Page 15
All manuals and user guides at all-guidesbox.com 5.5 MAX. DISTANCES AND EXTENSIONS DOOR PHONE SYSTEMS DOOR PHONE RISERS CONNECTION This chapter shows the different ways of connecting an all door phone riser regardless of whether it is derived from a column power supply unit, a column distributor or a column interface. The following indications are valid for audio only systems;...
Page 16
All manuals and user guides at all-guidesbox.com distance between the power supply and the call station For connection and distances of the riser, see the paragraph “Door phone risers connection” extension distance Cable 2Voice cable Ref. 1083/92 600m 800m 2Voice cable Ref. 1083/94 375m 800m Ø...
Page 17
All manuals and user guides at all-guidesbox.com Door unit interface derived devices with up to 2 door phone calling stations column 2VOICE column power supply unit door units interface 2VOICE column power supply unit door phone door phone call station call station Ex = distance between the door units interface and the call station Dx = distance between the door units interface and the power supply...
Page 18
All manuals and user guides at all-guidesbox.com distance between the 4-user distributor and the apartment station Bv = distance between the device from which the riser is derived and the most distant 4-user distributor Number of apartment stations according to the distance device from which the Cable...
Page 19
All manuals and user guides at all-guidesbox.com In/out connection of a video door phone riser 32 video door phone apartment stations max. for each riser Bv = distance between the device from which the riser is derived and the most distant apartment station No.
Page 20
All manuals and user guides at all-guidesbox.com For connection and distances of the riser, see the paragraph “Video door phone risers connection”. distance extension Cable video Colour 200m 800m 2Voice cable Ref. 1083/92 200m 800m 2Voice cable Ref. 1083/94 Colour 125m 800m Colour...
Page 21
All manuals and user guides at all-guidesbox.com Devices derived from a door units interface with 2 video door phone call stations max. column 2Voice column power supply unit Door units interface 2Voice column power supply unit Video door phone call station Ex = distance between the door units interface and the call station Dx = distance between the door units interface and the power supply For connection and distances of the riser, see the paragraph “Video door phone risers connection”.
Page 22
All manuals and user guides at all-guidesbox.com distance between the main call station and the most distant column interface distance Cable 2Voice cable Ref. 1083/92 200m 2Voice cable Ref. 1083/94 125m For distances and extension of each column, see paragraph “Devices derived from a column interface with one or two video door phone call stations”. Street side branch connection split on the 4 outputs of door units interface Max 12 distributor Distributor Distributor...
Page 23
All manuals and user guides at all-guidesbox.com Street side branch Max. total number of distance extension distributors or column Cable interfaces G1+G2 Max 12 2Voice cable Ref. 1083/92 400m 1200m Max 12 2Voice cable Ref. 1083/94 250m 750m For distances and extension of each column, see paragraph “Devices derived from a column distributor or a column interface with one or two video door phone calling stations”.
All manuals and user guides at all-guidesbox.com For distances and extension of each column, refer to “Devices derived from a column distributor or a column interface with one or two video door phone calling stations”. Street side branch connection split on only 1 output of the door units interface using 3 4-user distributors Ref.
All manuals and user guides at all-guidesbox.com 5.9 APARTMENT STATION SIGNAL CONNECTION Wire cross section area 0,28 mm Maximum distance Floor call button (CP) 10 m Supplementary ringer (S+, S-) 10 m 5.10 WIRING AND USE OF LINE TERMINATIONS Definitions: A two-wire line leading from a terminal pair of the column distributor or power unit to BACKBONE: which the devices are connected.
All manuals and user guides at all-guidesbox.com • A jumper to be inserted in the line termination (Z) is present in apartment stations, distributors, column distributors and column interfaces. Activate the termination for devices wired at the end of a line from which another section does not start from the device terminals (end of line): Z= ON Z= ON Z= ON LINE OUT...
All manuals and user guides at all-guidesbox.com 6.1 LINE TERMINATION SETTINGS (Z) Refer to the previous chapter for correct Z line termination settings. Default settings All door phones are configured by default with line termination on. All brackets are configured by default with line termination on. All distributors are configured by default with line termination off. All column interfaces are configured by default with line termination on (jumper between Z terminal present). The line terminal on/off jumper (Z) is not present on some video door phones (e.g. 1750/1, 1750/5, 1750/6, 1750/15, 1750/16 and 1760/6). In this manner, in the typical case of system with calling station connected directly to the power supply unit and apartment stations connected as floor extensions to a column, only the jumper of the termination of the last distributor needs to be changed to the ON position.
Page 28
All manuals and user guides at all-guidesbox.com CALLING STATION CONFIGURATION The calling stations in the system must be univocally identified according to the type. The following explanation concerns the door unit with buttons mod. Sinthesi. Refer to the corresponding instruction booklet for other door unit types, e.g.
Page 29
All manuals and user guides at all-guidesbox.com Camera lights: the camera lights may be turned off if illumination in the surrounding environment is sufficient at night. Station type Main Secondary Secondary Secondary 0 Secondary 1 station address Door opener Door opener Door opener free privacy Interruption Camera Camera Camera lights lights lights DOOR OPENING TIME The position of the rotary switch (DOOR TIME) determines the activation time of the door lock.
Page 30
All manuals and user guides at all-guidesbox.com USER 0 USER 1 USER 2 USER 3 USER 4 USER 5 USER 6 USER 7 USER 8 USER 9 USER 10 USER 11 USER 12 USER 13 USER 14 USER 15 USER 16 USER 17 USER 18 USER 19...
Page 31
All manuals and user guides at all-guidesbox.com USER 66 USER 67 USER 68 USER 69 USER 70 USER 71 USER 77 USER 72 USER 73 USER 74 USER 75 USER 76 USER 79 USER 81 USER 82 USER 83 USER 78 USER 80 USER 84 USER 85...
All manuals and user guides at all-guidesbox.com INT 0 INT 1 INT 2 INT 3 CONFIGURATION OF COLUMN DISTRIBUTORS 1083/53 AND COLUMN INTERFACES REF. 1083/50 All information on the column interface Ref. 1083/50 (number of users, distances, extensions, dip switch configuration, etc.) also apply to column distributor Ref.
All manuals and user guides at all-guidesbox.com Apartment stations Check for direct voltage in the range from 38V and 48V at the LINE terminals. Column distributor Ref. 1083/53 and column interfaces Ref. 1083/50 Check for direct voltage in the range from 38V and 48V at the POWER, LINE IN and LINE OUT terminals.
All manuals and user guides at all-guidesbox.com 3. The termination of the last distributor must be inserted if a segment connected by means of distributors is disconnected. Z= ON Z= ON LINE IN LINE IN LINE OUT LINE OUT Z= OFF Z= ON LINE IN LINE IN...
Page 35
All manuals and user guides at all-guidesbox.com Example: • System with 3 columns, the first with 4 users, the second with 6 users and the third with 8 users. • Access advanced configuration. • Set the ID dip-switch to 0. • Press the upper button of the door unit (first button). • Set the ID dip-switch to 1. • Press third button of the first button module (fifth button) to associate user 0 of column 1 in this manner. • Set the ID dip-switch to 2. • Press first button of the third button module (eleventh button) to associate user 0 of column 2 in this manner.
All manuals and user guides at all-guidesbox.com “B” Secondary call module with 8 buttons ID = n AUX dip 2 = 1 offset = 11 Called users: from 11 to 18 Secondary call module with 11 buttons ID = n AUX dip 2 = 0 2Voice column...
Page 37
All manuals and user guides at all-guidesbox.com The following configurations are possible according to the number of programmed cameras: Video door unit Door phone door unit no surveillance no surveillance camera camera (default) (default - video door phones only) 1 surveillance camera 1 surveillance camera 2 surveillance cameras 2 surveillance cameras 3 surveillance cameras 3 surveillance cameras 1038/69 or 1083/69...
Page 38
All manuals and user guides at all-guidesbox.com – Press the button to be programmed for at least 3 seconds, until the confirmation tone sounds. – Go to the user who will be called by pressing the button (user B) and press the door opener button. The apartment stations will be beep to indicate that they have been programmed. –...
Page 39
All manuals and user guides at all-guidesbox.com INTERCOM FUNCTION IN THE SAME APARTMENT Go to the apartment station to be programmed as caller (apartment station C1). There are two different ways to enter programming state (check which method is used on the instruction booklet supplied with the product): 1b) With dedicated button (Miro and Vmodo).
All manuals and user guides at all-guidesbox.com – Hook up the handset of apartment station C1 (or press the audio button again). It will beep to indicate exit from programming mode. The other functions will not be lost if the buttons are programmed for this function because the intercom call is made with the handset off-hook.
All manuals and user guides at all-guidesbox.com NOTES ON DIAGRAMS C4.013 Fit a 9V (MN1604/6LR61) battery in the VX.037 On device setting the jumper/dip-switch ringer. The ringer is equipped with two “Z” in position “ON”. jumpers indicated by W1 and W2. Remove one of the two jumpers for two-tone V2.003 Switch the line termination “Z” to the off or one-tone operation as shown in the...
Page 42
All manuals and user guides at all-guidesbox.com Connection of 1 column with N video door phones to 1 video entrance panel (VPE). SV124-1353 “COLUMN” Ref.1083/55 4-USER DISTRIBUTOR TO THE NEXT DISTRIBUTORS Ref.1083/55 4-USER DISTRIBUTOR TO NEXT MODULES RINGER MAX. 4 EXPANSION CIRCUITS 16 USERS NAME TAG LIGHTING...
Page 43
All manuals and user guides at all-guidesbox.com Connection of 1 column with N video door phones to 2 video entrance panels (VPE). SV124-1354 COLUMN BACKBONE “1” LINE OUT LINE LINE LINE LINE LINE (VD.007) LINE LINE LINE LINE LINE LINE IN (VD.007) (VD.007) Ref.1083/55...
Page 44
All manuals and user guides at all-guidesbox.com Connection of N columns with 2 risers each with N several video door phones to 1 main video door unit. Furthermore, each group is connected to 1 or 2 secondary video door units. SV124-1355 COLUMN “1”...
Page 45
All manuals and user guides at all-guidesbox.com COLUMN “2” BACKBONE “3” BACKBONE “4” EQUIPMENT/CONNECTIONS BACKBONES “3-4” AS BACKBONE “1” Ref.1083/5X 2VOICE COLUMN DISTRIBUTOR OR COLUMN INTERFACE (VX.021) LINE 2 LINE 1 IN 0 IN 1 LINE LINE POWER SECONDARY “III” SECONDARY “IV”...
Page 46
All manuals and user guides at all-guidesbox.com Connection of N columns with 2 risers each with N video door phones with 2 main video door phones. Furthermore, each group is connected to 1 or 2 secondary video door units. SV124-1356 COLUMN “1”...
Page 47
All manuals and user guides at all-guidesbox.com COLUMN “2” BACKBONE “3” BACKBONE “4” EQUIPMENT/CONNECTIONS BACKBONES “3-4” AS BACKBONE “1” Ref.1083/5X 2VOICE COLUMN DISTRIBUTOR OR COLUMN INTERFACE (VX.021) TO THE DISTRIBUTORS OR COLUMN INTERFACES OF THE SUBSEQUENT GROUPS SECONDARY “III” SECONDARY “IV” AS MAIN “A”...
Page 48
All manuals and user guides at all-guidesbox.com Replacement of the push-button panel mod. Sinthesi S2 with push-button panel mod. Sinthesi Steel or mod. Alpha. Sinthesi S2 TO FOLLOWING MODULES Sinthesi Steel MAX. 4 EXPANSION INPUT CIRCUITS 16 USERS Cable 'B' or 'A' (VX.006) Output Input...
Page 49
All manuals and user guides at all-guidesbox.com Example of connection for activation of an additional electric lock in parallel with the system one SV124-1029C A) Manual command for electric lock simultaneous activation. LINE TO THE SYSTEM LINE TO THE SYSTEM RELAY BOX LOCK Sch.788/52...
Page 50
All manuals and user guides at all-guidesbox.com SV124-1024C Example of call repeat with relay box Ref. 788/52. LINE LINE (VD.007) ~230 (VD.007) LINE ~ Ref.9000/230 ~230 (VX.008) LINE ~ Ref.9000/230 (VX.008) LOAD 100V=/5A LOAD 100V=/5A POWER POWER Ref.788/52 Ref.788/52 Example of call repeat with relay box Ref. 788/22. LINE LINE (VD.007)
Page 51
All manuals and user guides at all-guidesbox.com SV124-1294 In-out system from a four-user distributor branch: connection of max. four called devices in parallel. The video door phones are Mod. 1750, for example: A) Ref. 1750/1 B) Ref.1750/1 with Ref. 1750/50 accessory The door phones are Mod.
Page 52
All manuals and user guides at all-guidesbox.com WARNING The line terminal on/off jumper (Z) is not present on some video door phones (e.g. 1750/1, 1750/5, 1750/6, 1750/15, 1750/16 e 1760/6). Consequently, the in-out connection can only be implemented by adding the Ref. 1750/50 accessory, which must be installed in the device preceding the end- of-line device in the specific housing on the back of the video door phone.
Need help?
Do you have a question about the 2VOICE 1083 and is the answer not in the manual?
Questions and answers