To Change The Status Of An Actuator; To Change The Status Of A Direct Function - Daikin LMSEY1A09AVM01 Operation Manual

4.2.6

To change the status of an actuator

INFORMATION
If no button is pressed, the terminal will return to the
standard display after 7 seconds.
1 Unlock the user interface. See "4.2.1 To unlock the user
interface" [ 4 7].
2 Press the PROGRAM button to enter "dir" mode.
Result: The display shows "dir". The buttons that are on steady
indicate that the corresponding actuator/function is active. The
buttons that are flashing indicate that the actuator/function is
not active.
3 Press a button (e.g. the continuous cycle button).
Result: The status changes (e.g. from active to not active).
4.2.7

To change the status of a direct function

INFORMATION
If no button is pressed, after 20 seconds the terminal will
automatically return to the standard display.
1 Unlock the user interface. See "4.2.1 To unlock the user
interface" [ 4 7].
2 Press the PROGRAM button to enter "dir" mode.
Result: The display shows "dir".
Changing the direct function:
LMSEY1A09/13 + LMSEY2A19/25
Daikin LMS
4P728169-1A – 2023.03
3 Press the PROGRAM button in the "dir" screen.
Result: The display shows the first direct function screen (e.g.
"Fr").
4 Press the UP and DOWN buttons to navigate the menu.
5 Press the "PRG" button when arrived at the direct function
screen you want to change (e.g. "Eco").
Result: You entered the direct function.
6 Press the UP and DOWN buttons to change the setting (e.g.
change to "On").
7 Press the PROGRAM button to confirm the new setting.
Result: The display goes back to the direct function screen
(e.g. "Eco").
8 Press the UP and DOWN buttons to navigate the menu. Scroll
to the next direct function of which you want to change the
status.
When finished changing direct functions status:
9 Scroll to the "ESC" screen.
10 Press the PROGRAM button.
Result: The display goes back to the actuator/function direct
("dir") activation screen.
Meaning of direct function screens that appear on the display
Display Description
Alr Display alarms
Auc Activate auxiliary output
BtE Enable Bluetooth
CnC Activate continuous cycle
dfM Start defrost
Ec1 Load embedded
configuration 1
Ec2 Load embedded
configuration 2
Eco Activate ECO mode
Fr Firmware version
HAC Direct access to HACCP
menu
HL Dim Light
HU Set humidity level
Lht Activate lights
4 User interface
Display alarms
DOC > 0
If featured
cc > 0
If featured
If featured
/AF > 0
F2 = 3
DOE > 0
Operation manual
9