Recording - RCA RTD300 User Manual

RTD300 EN 7/25/03 2:36 PM

Recording

To Record With VCR
OPEN/CLOSE POWER
VCR /INPUT DVD TV
–
TRACKING +
1 2 3
4 5 6
7 8 9
CLEAR 100/P-SCAN
0
SETUP
VOL– VOL+
ENTER
OK
ZOOM PROGRAM CH/PRESET
–
+
–
TUNING & SEARCH +
REC
MEMORY SPEED/ANGLE
STEP
SEARCH SUBTITLE AUDIO SOUND FIELD
REPEAT A–B DELAY LEVEL
MUTE CLK/CNT TV/VCR SLEEP
TV INPUT
To Enjoy Another TV Channel or DVD during recording
40
Page 44
1
1
Press the [ ] button to turn the unit on.
• Press the [VCR] button on the remote control to select VCR mode.
• Turn on the TV and select Ch 3, or press the [INPUT] button on your TV set
to select External Input mode.
2
2
Insert a recordable tape into the VCR cassette deck.
Insert a tape with its recording tab attached.
3
3
With the [CHANNEL], [NUMBER] and [INPUT] buttons, select the
desired broadcasting channel or external input unit to record.
4
4
Select the desired speed (SP or SLP) with [SPEED] button.
5
5
Press the [REC] button to start recording.
6
6
To pause recording, press the [PAUSE] button.
When the unit remains in pause mode for 5 minutes, the recording is stopped
automatically.
7
7
To stop recording, press the [STOP] button.
1
1
To watch another TV channel while recording, press the [TV/VCR] button.
Change the TV channel with the [CHANNEL] buttons on your TV.
2
2
To play DVD during video recording, insert a DVD disc.
Load the desired DVD disc into the disc compartment, press the [DVD] button to
select DVD OUTPUT mode and press the [PLAY] button.