Display Setup - RCA RTD300 User Manual

RTD300 EN 7/25/03 2:36 PM

DISPLAY Setup

A user can set up a connected TV condition and screen.
22
Page 26
1
1
In STOP or RESUME STOP mode,
press the [SETUP] button to display
the DVD SETUP menu.
Press the [2 ] or [ 3] buttons to select
"Display" from the top menu bar.
2
2
Press the [5 5 ] or [∞ ∞ ] buttons to
select among Display settings.
Press [ENTER] to show the options
available for each display setting.
3
3
Select among display setting options
using the [5 5 ] or [∞ ∞ ] buttons.
Press [ENTER] to confirm your
selection.
Aspect Ratio:
• Letterbox (4:3) - The movies will be
played in their original (height to width
ratio) aspect ratio. The entire frame of
the movie can be seen on the TV screen
but black bars may show on the top and
bottom of the screen.
• Widescreen 16:9 - Only choose this setting
if your TV is a widescreen TV or Images
may appear distored.
• Pan & Scan (4:3) - Only the center of the
original screen will be shown on the TV
screen.
DVD initial setting
Language Display Audio Ratings
Aspect Ratio : Letter Box (4:3)
Screen Saver : Off
Video Out : S-Video
Language Display Audio Ratings
Aspect Ratio : Widescreen (16:9)
> Letter Box (4:3)
Screen Saver :
Pan & Scan (4:3)
Video Out : S-Video
Language Display Audio Ratings
Aspect Ratio : Widescreen (16:9)
> Letter Box (4:3)
Screen Saver :
Pan & Scan (4:3)
Video Out :