Hi-Fi Stereo Playback (Hi-Fi Model Only) - RCA RTD300 User Manual

RTD300 EN 7/25/03 2:36 PM
Hi-Fi Stereo Playback
Playing a tape in Hi-Fi high-quality
• Press the [AUDIO] button repeatedly to select among playback qualities.
Hi-Fi
• "Hi-Fi" signal lights up at the top of a screen.
• If the Hi-Fi sound on the tape is not stable (background noise), select LINEAR to reduce them.
Forced Mono
• Programs are broadcasted in mono or stereo sound, or with a SAP.
• Press [AUDIO] repeatedly to select among STEREO, MONO and SAP.
STEREO
• In some cases, the receiving conditions may be poor when receiving stereo or SAP (Secondary Audio
Programs) broadcasting. This may causes frequent interference or the volume may become uncontrollable.
• Press [AUDIO] in stereo or SAP mode to select mono sound.
To return to stereo sound, either press the [AUDIO] button again or reselect the channel.
Recording Stereo or Secondary Audio Programs (SAP)
• When recording a stereo signal, the recording is in Hi-Fi mode.
• SAP is only available for areas with such station services.
• The following guidelines will help you decide on the best method for recording programs. Choose:
- Select Stereo reception for normal recordings and for recording stereo broadcasting television.
- Select Mono reception if the stereo signal is weak or when there is interference.
- Select SAP reception to record a second audio program. An example of a SAP is a program that is
broadcasted in English, but has a Spanish SAP.
• You can only record stereo and SAPs if the program is broadcasted in stereo or has SAP. Consult a
television guide for program broadcasting information.
20
Page 24
LINEAR MIX
MONO SAP
(Hi-Fi Model only)