Ensure the AC adapter is fully inserted into the
AC outlet and into the power connection
Ensure the hertdphones
ON/OFF switch is in
the ON position.
batteries may be too low. Charge batteries
Ensure the TV or audio component
is on and tuned to a
channel with audio.
Adjust the volume control on the hexiphone
turn up the volume.
The connected audio/\%leo
is not playing
(CD, Tape, etc...). Check the audio source.
The volume of headphone
is turned down, adjust the
volunw to an appropriate
Ensure the stereo indicator light is on. If not,
adjust the tuning control on the headphones
until the indicator light is on.
Change the position of the FREQ. ADJUST control
to change operating
frequency. You must then
adjust the tuning control on the headphone
the stereo indicator light is on.
Headphone batteries may be too low. Charge the batteries
or replace with new ones if they do not charge.
Ensure the level control wheel is adjusted properly
is too far from transmitter,
The input level of the audio signal is too low. Turn
up the volume of the audio source equipment.