First Time Activation; Bluetooth Remote Pairing - ViewSonic M1 Pro User Manual

First Time Activation

If the projector is activated for the first time, you will need to select your Preferred
Language, Projection Orientation, and Network Settings. Follow the on-screen
instructions using the OK and Up/Down/Left/Right buttons on the remote control.
When the "Finish Screen" appears, this indicates the projector is ready to use.

Bluetooth Remote Pairing

1. Press and hold the Settings and Return button for 3 seconds to enter pairing
mode.
2. The LED on the remote control will flash blue.
3. A "Successfully Paired" message will show. If not, please try again or select Next
and go to: App Center > Bluetooth Remote app.
28