Using The Projector; Starting Up The Projector; First Time Activation; Auto Focus - ViewSonic M2W User Manual

Using the Projector

Starting Up the Projector

1. Ensure the projector's power cord is properly connected to a power outlet.
2. After plugging in the DC Power Adapter, the projector will turn on automatically.
NOTE: The Status LED will be green during startup.

First Time Activation

If the projector is activated for the first time, you will need to select your Projection
Orientation, Preferred Language, Network Settings, and Source Input. Follow the
on-screen instructions using the OK and Up/Down/Left/Right buttons on the
remote control. When the Finish screen appears, this indicates the projector is
ready to use.

Auto Focus

The automatic focus adjustment will run for the first time activation.
NOTE: You may use the Left/Right buttons to focus the projection manually.
27