ViewSonic M1 Quick Start Manual

1. Turn the projector on by rota+ng the stand. Wait about 40 seconds for it to boot up to
the main screen (aEer the Viewsonic logo first appears).
2. Place it on the small stool that we provide for you.
3. Pull the fabric tab on the side to reveal the connec+on ports. Connect your device.
4. Using the buMons on the back of the projector, select the port you are using.
5. Focus the image using the dial next to the lens.
6. Aim the projector so the boMom of the screen is parallel and about 5-10cm above the
horizontal zipper that runs around the tent on the inside. The screen will be larger the
further back you put the projector.
7. Enjoy!
Most people use an iPhone or iPad with the Projector using our supplied adaptors, but you
can use any device that has a HDMI output, such as a laptop or Blu-Ray/DVD player.
The projector will last approximately 3 hours on its internal baMery. You can connect it to
mains power but Buone Noa will not be liable for any electrical hazard created by power
leads in your backyard or in the tent.
Please do not leave the projector in the tent or outdoors overnight. If the projector is
damaged, a $500 replacement fee will apply.
DO NOT LOOK DIRECTLY INTO THE PROJECTOR LENS OR YOU COULD DAMAGE YOUR EYES!
In the Box:
• Viewsonic M1 Projector
• HDMI Cable
• USB-C Cable
• Apple Lightning to HDMI adaptor
• USB-C to HDMI adaptor
• AC power lead and AC-DC transformer
Congratula+ons on hiring our
projector! We hope you have a
fantas+c night watching movies in
your tent, here's how to use it: