Table of Contents
Advertisement
Firmware Update by USB with FAT32 Format
NOTE: NTFS format, read only.
1. Download the latest version from the ViewSonic website and copy the file to a
USB device.
2. Plug the USB into the projector, then go to: Home > Setting > Firmware Upgrade
> Software Update By USB.
3. Select Enter by pressing OK on the remote control.
4. The system will detect the Firmware version and display the above dialog
message.
5. After selecting Yes, a progress bar will appear as the update process begins.
6. After reaching 100% the projector will restart and the screen will turn black for a
few minutes. The whole process will take about 10 minutes.
7. After updating the Firmware, it will take a few minutes to restart the projector.
66
Advertisement
Table of Contents
Need help?
Do you have a question about the M1 Pro and is the answer not in the manual?
Questions and answers