First Time Activation; Bluetooth Remote Pairing - ViewSonic M10 User Manual

First Time Activation

When the projector is activated for the first time, you will need to Pair the
Bluetooth Remote Control, select your Preferred Language, Projection Orientation,
and Network Settings.
Follow the on-screen instructions using the OK and Up/Down/Left/Right buttons
on the remote control. Upon completion, the projector is ready to use.

Bluetooth Remote Pairing

1. Press and hold the Settings and Return button for 3 seconds to enter pairing
mode.
2. The LED on the remote control will flash blue.
3. A "Successfully Paired" message will show. If not, please try again or select Next
and go to: App Center > Bluetooth Remote app.
15