ViewSonic M1 Pro User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Projector
  5. M1 Pro
  6. User manual
ViewSonic M1 Pro User Manual

ViewSonic M1 Pro User Manual

Portable led projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M1 Pro
Portable LED Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website.
Model No. VS19217
P/N: M1 Pro

Advertisement

Table of Contents
loading

Related Manuals for ViewSonic M1 Pro

Summary of Contents for ViewSonic M1 Pro

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
  • Page 2 As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

  • Page 3: Safety Precautions

    Safety Precautions following Safety Precautions before you start using the projector. Please read the • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Allow at least 20" (50 cm) clearance around the projector to ensure proper ventilation.
  • Page 4 (UPS). • If smoke, an abnormal noise, or a strange odor is present, immediately switch the projector off and call your dealer or ViewSonic®. It is dangerous to continue using the projector. • Use only attachments/accessories specified by the manufacturer.

  • Page 5: Table Of Contents

    Contents Safety Precautions ............3 Introduction ..............8 Package Contents ....................8 Product Overview ....................9 Projector ........................9 I/O Ports ........................ 10 Remote Control ..................... 11 Remote Control - Effective Range ................. 12 Remote Control - Replacing the Batteries ............. 12 Initial Setup ...............
  • Page 6 Using the Projector ............ 26 Starting Up the Projector ..................26 Adjusting the Projected Image ................27 Adjusting the Projector's Height and Projection Angle ......... 27 Adjusting the Focus ....................27 First Time Activation .....................28 Bluetooth Remote Pairing ..................28 Preferred Language ....................29 Projection Orientation ..................
  • Page 7 Appendix ..............75 Specifications ......................75 Timing Chart ......................76 HDMI/USB C Video Timing ..................76 HDMI/USB C Support PC Timing ................77 3D Support Timing ....................78 LED Indicators .......................79 Troubleshooting ....................80 Maintenance......................81 General Precautions ....................81 Cleaning the Lens ....................81 Cleaning the Case ....................

  • Page 8: Introduction

    Introduction Package Contents Smart LED Projector Number Description Projector Power Cord USB Type C Cable Power Adapter Remote Control with Batteries Carrying Bag Quick Start Guide...

  • Page 9: Product Overview

    Product Overview Projector Number Description Volume Up Volume Down Play / Pause LED Indicator (Power and Battery LED) Speaker IR Receiver Lens Focus Ring I/O Ports Smart Stand Tripod Mount...

  • Page 10: I/O Ports

    I/O Ports DC USB C USB C USB A HDMI 15V/3A 5V/2A 5V/1.5A 1. DC IN 2. USB Type C (DC IN) 3. Audio Out 4. USB Type C¹ 5. HDMI² ³ 6. USB Type A ¹ Please use the supplied USB-C cable, and ensure your USB-C device can support video transmission. ²...

  • Page 11: Remote Control

    Remote Control Button Description Power Turns the projector On or Off Source Displays the input source selection menu Bluetooth Mode Enable Bluetooth Up/Down/Left/ Navigate and select menu items; Right Keystone adjustment Confirms the selection Setting Displays the Setting menu Return Returns to the previous screen Home Access the Home screen...

  • Page 12: Remote Control - Effective Range

    Remote Control - Effective Range To ensure proper function of the remote control follow the steps below: 1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s). 2. The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.) Remote Control - Replacing the Batteries 1.

  • Page 13: Initial Setup

    Initial Setup This section provides detailed instructions for the initial set up your projector. Choosing a Location - Projection Orientation Personal preference and room layout will decide the installation location. Consider the following: • Size and position of your screen. •...

  • Page 14: Projection Dimensions

    Projection Dimensions • 16:9 Image on a 16:9 Screen NOTE:  (e) = Screen / (f) = Center of Lens 16:9 Image on a 16:9 Screen (b) Projection (a) Screen Size (c) Image Height Image Width Distance 1016 37.3 19.6 34.86 1270 46.6 1184...

  • Page 15: Making Connections

    Making Connections Connecting to Power DC Power (Power Outlet) 1. Connect the power cord to the power adapter. 2. Connect the power adapter to the DC IN jack at the side of the projector. 3. Connect the power cord plug to a power outlet. When connected, the status LED will turn red.

  • Page 16: Power On By Power Bank Function

    Power on by Power Bank Function The projector can also be powered by a power bank. 15V/3A To power your projector: 1. Connect one end of the USB Type C cable to the USB-C port of the projector. 2. Connect the other end of the USB Type C cable to the power bank. NOTE: ...

  • Page 17: Connecting To External Devices

    Connecting to External Devices HDMI USB A HDMI HDMI Connection Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI port (supports HDCP 1.4/HDMI 1.4) of your projector.

  • Page 18: Bluetooth Connection

    Bluetooth Connection Bluetooth Speaker The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback. To connect and pair your device: 1. Go to: Home > Bluetooth. 2. Use the Left and Right directional buttons on the remote control to select Bluetooth Speaker or Bluetooth Pairing.
  • Page 19 4. A sound effect will be audible upon entering pairing mode. 5. Upon successful connection, another sound effect will be audible. NOTE:  • The projector’s name will be labeled as “M1-Pro”. • Only the Power and Return buttons can exit Bluetooth mode.

  • Page 20: Bluetooth Out

    Bluetooth Out Connect the projector to external headphones or speakers that support Bluetooth. To connect and pair your device: 1. Go to: Home > Bluetooth. 2. Use the Left and Right directional buttons on the remote control to select the Bluetooth Out option.

  • Page 21: Connecting To Networks

    Connecting to Networks Wi-Fi Connection With built-in Wi-Fi, you can easily connect to wireless internet networks. To connect to a Wi-Fi network: 1. Go to: Home > Settings > Network Settings > Wi-Fi 2. Press Left or Right on the remote control to select Enable. 3.
  • Page 22 4. If you connect to a secure Wi-Fi network, you must enter the password when prompted.

  • Page 23: Custom Ssid

    Custom SSID 1. Go to: Home > Settings > Network Settings > Wi-Fi 2. Press Left or Right on the remote control to select Enable. 3. From the available Wi-Fi networks list select Others and press OK on the remote control.
  • Page 24 5. Enter the password when prompted.

  • Page 25: Wireless Screen Mirroring

    3. “ViewSonic PJ-XXXX” will now be visible, select it. NOTE:  Some Android devices support direct “Casting”. If your device does, go to the Casting feature and choose “ViewSonic PJ-XXX” from the list of available devices. You can also scan the FAQ QR code and follow the...

  • Page 26: Using The Projector

    Using the Projector Starting Up the Projector 1. Ensure the projector is connected to a power source or that the battery has sufficient charge. 2. Open the Smart Stand by moving the lens cover down. 3. Move the Smart Stand to your desired viewing angle. NOTE: ...

  • Page 27: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Projector's Height and Projection Angle The projector is equipped with one (1) Smart Stand. Adjusting the stand will change the projector’s height and the vertical projection angle. Carefully adjust the stand to fine tune the projected image’s position. NOTE: ...

  • Page 28: First Time Activation

    First Time Activation If the projector is activated for the first time, you will need to select your Preferred Language, Projection Orientation, and Network Settings. Follow the on-screen instructions using the OK and Up/Down/Left/Right buttons on the remote control. When the “Finish Screen” appears, this indicates the projector is ready to use. Bluetooth Remote Pairing 1.

  • Page 29: Preferred Language

    Preferred Language Select the desired language and press OK to confirm the selection. Projection Orientation Select the preferred projection orientation and press OK to confirm the selection. For more information, see page 13.

  • Page 30: Network Settings

    Network Settings Select one of the available Wi-Fi options. For more information, see page 21.

  • Page 31: Shutting Down The Projector

    Shutting Down the Projector 1. Pressing the Power button on the remote control will result in the following message: 2. Press the Up/Down buttons on the remote control to select Turn Off and press OK on the remote control. NOTE:  When not in use, please press the Power button to power off and close the Smart Stand.

  • Page 32: Input Source Selected - On-Screen Display (Osd) Tree

    Input Source Selected - On-Screen Display (OSD) Tree After your input source is selected, you can adjust the Image Setting and Advanced menus. Main Menu Sub-menu Menu Option Brightest Color Mode Movie Brightness (-/+, 0~100) Contrast (-/+, -50~50) 6500K 7500K 9300K Red Gain (-/+, 0~100)
  • Page 33 Main Menu Sub-menu Menu Option Auto Aspect Ratio 16:9 Auto HDMI Settings Range Full Limited Disable Frame Sequential 3D Format Frame Packing 3D Settings Top-Bottom Advanced Side-by-Side Disable 3D Sync Invert Invert Movie Audio Mode Music Audio Settings Audio Volume (-/+, 0~50) Disable Mute...
  • Page 34 Image Setting Menu After your input source is selected, you can adjust the Image Setting menu. To access the Image Setting menu: 1. Press Setting on the remote control. 2. Use the Up/Down buttons to select a menu.
  • Page 35 3. Then use the Left/Right buttons to enter the sub-menu(s) and/or adjust the settings. 4. Press the Return button to go to the previous menu or exit.
  • Page 36 Menu Option Description The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal. Brightest Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required (e.g., well-lit rooms).
  • Page 37 Menu Option Description Select the color temperature setting. • 6500K: Maintains normal white coloring. • 7500K: A higher, cooler color temperature than 6500K. • 9300K: The highest color temperature; makes the image appear the most bluish-white. • User Color: Adjust red, green, and blue values as desired.
  • Page 38 Menu Option Description Reset Current Return current color settings to their default values. Color Settings...
  • Page 39 Advanced Setting Menu After your input source is selected, you can adjust the Advanced menu. To access the Advanced menu: 1. Press Setting on the remote control. 2. Press the Right button to access the Advanced menu.
  • Page 40 3. Use the Up/Down buttons to select a menu. 4. Then use the Left/Right buttons to enter the sub-menu(s) and/or adjust the settings. 5. Press the Return button to go to the previous menu or exit.
  • Page 41 Menu Option Description The aspect ratio is the ratio of the image width to the image height. With the advent of digital signal processing, digital display devices, like this projector, can dynamically stretch and scale the image output to a different aspect than that of the image input signal.
  • Page 42 Menu Option Description Enables you to enjoy 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images while wearing 3D glasses. 3D Format 3D Settings Adjust and choose from: Automatic, Off, Frame Sequential, Frame Packing, Top-Bottom, Side-by-Side.

  • Page 43: Operating The Projector

    Operating the Projector This section will introduce the Home Screen and its menus. Home Screen The Home Screen is displayed every time you start the projector. To navigate the Home Screen, simply use the directional buttons on the remote control. You can return to the main Home Screen at any time by pressing the Home button on the remote control, regardless of what page you are on.

  • Page 44: Home Screen - On-Screen Display (Osd) Menu Tree

    Home Screen - On-Screen Display (OSD) Menu Tree Main Menu Sub-menu Menu Option File Management ViewSonic App Apps Center Store Bluetooth Speaker Bluetooth Bluetooth Pairing Bluetooth Out Disable SSID: Configure IP IP Address Network Settings Wi-Fi Enable Subnet Mask Default Gateway...
  • Page 45 Main Menu Sub-menu Menu Option English French German Italian Spanish Russian 繁體中文 簡體中文 日本語 韓語 Swedish Dutch Language Turkish Czech Basic Settings Portuguese Thai Polish Finnish Setting Arabic Indonesian Hindi Vietnam Greek Hungarian Front Table Front Ceiling Projector Projection Rear Table Rear Ceiling Disable Auto Keystone...
  • Page 46 Main Menu Sub-menu Menu Option 0.8x Zoom 0.9x Basic Settings 1.0x Test Pattern Disable Power On Source HDMI USB-C Disable Power On/Off Ring Tone Enable Disable 10 minutes Auto Power Off 20 minutes 30 minutes Disable 30 minutes 1 hour Setting Smart Energy 2 hours...
  • Page 47 Main Menu Sub-menu Menu Option Disable High Altitude Mode Enable Advanced Reset Settings Settings Reset to Factory Default Software Update Online Software Update Firmware by USB Upgrade Enable Setting OTA Reminder Disable Software Version Light Source Hours System Version Memory XX GB of XX GB Information Information...

  • Page 48: Menu Operations

    Menu Operations File Management Easily manage files and folders. 1. Select: Home > File Management. 2. Select a device on the source list. Use the direction buttons to select the desired file. Then press OK on the remote control to open the selected file. 3.
  • Page 49 How to Edit a File 1. While in File Management, press and hold the OK button for three (3) seconds. 2. A check box will appear at the front of each file. Use the direction buttons and press OK to select one or more files. 13:00 3.

  • Page 50: How To Use The Media Control Bar Buttons

    How to Use the Media Control Bar Buttons The media control bar buttons will appear on screen if a video, music, or photo file are selected to be opened. Picture Video Music Back Back Back Play Rewind Play Next Play Pause Zoom in Pause...

  • Page 51: Supported File Formats

    Supported File Formats Multimedia Formats Extension Type Codec .xvid Video Xvid, H.264 .avi Audio .mp4 .m4v Video H.264/MPEG-4 .mov .mkv Video H.264 Video H.264, MPEG-2 .trp Audio .mts .m2ts Video MPEG-1, MPEG-2 .vob Audio DVD-LPCM .mpg Video MPEG-1 Office Formats Items Indicators doc/docx...
  • Page 52 Supported Photo formats: Format Type Maximum Resolution Progressive JPEG 7680 x 4320 .jpg/.jpeg Baseline JPEG 7680 x 4320 .bmp 9600 x 6400 .png 7680 x 4320 Supported External Connected Device formats: Support Size Device NTFS Format FAT32 Format exFAT (Max. Size) Read Write Read...

  • Page 53: Apps Center

    Apps Center View, launch, and uninstall Apps. 1. To view your Apps, select: Home > Apps Center. 2. Use the direction buttons to select the desired App. Then press OK on the remote control to launch the App. NOTE:  Press the Home button on the remote control to return to the Home Screen at anytime.
  • Page 54 • Users can install third-party Apps by .apk file in File Management. However, some third-party Apps may have compatibility issues. • Apps not pre-loaded by ViewSonic may not be compatible or work properly. • Some Apps may require a Keyboard and Mouse.
  • Page 55 To Uninstall Apps 1. Open the Apps Center by selecting: Home > Apps Center. 2. Use the directional buttons to select the desired App. 3. Press and hold OK on the remote control for three (3) seconds. The below dialogue box will appear: 4.

  • Page 56: Bluetooth

    Bluetooth The projector is equipped with Bluetooth that allows the user to connect their device wirelessly for audio playback. For more information, see “Connecting to Bluetooth” on page 18.

  • Page 57: Setting

    Setting Under Setting you can adjust Network, Basic, and Advanced Settings, Date & Time, Firmware Update, and view Information. Network Settings 1. Select: Home > Setting > Network Settings. 13:00 Basic Settings Date & Time Network Settings Firmware Update Advanced Settings Information...
  • Page 58 2. View and adjust your Wi-Fi and network settings. 3. To setup a Wireless connection, see “Connecting to Networks” on page 21.
  • Page 59 Basic Settings 1. Select: Home > Setting > Basic Settings. 13:00 Network Settings Date & Time Basic Settings Firmware Update Advanced Settings Information 2. Use the Up and Down buttons to select the desired option and press OK. Then use the Left and Right buttons to make adjustments or selections.
  • Page 60 3. To return to a previous menu press the Return button. Menu Description Language Select your desired language. Projector Position Select the preferred projection position. Adjust trapezoidal screen image distortion. Auto V Keystone Provides a rectangular screen image by automatically adjusting the keystone number when there is a trapezoidal screen image caused by the tilting of the projector.
  • Page 61 Date & Time Adjust Date, Time, Time Zone, and Time Format. NOTE:  The time is displayed in the top-right corner after connecting to the Internet. 1. Select: Home > Setting > Date & Time. 2. Use the Up and Down buttons to select the desired option and press OK. Then use the Left and Right buttons to make adjustments or selections.
  • Page 62 Menu Description Synchronize the date and time automatically after connecting to the Internet. Enable Automatic Date & Time Turn on synchronization. Disable Turn off synchronization. Adjust the date automatically when connected to a Date network. Adjust the time automatically when connected to a Time network.
  • Page 63 Firmware Upgrade Users can update the firmware by internet or USB, and check the version number. NOTE:  Do not unplug the power cord, USB, or disconnect from the Internet during the upgrading process. 1. Before entering the Firmware Upgrade menu, ensure the projector is connected to the Internet.
  • Page 64 1. Go to: Home > Setting > Firmware Upgrade > Software Update Online. 2. Select Enter by pressing OK on the remote control. 3. The system will check the ViewSonic website (OTA) and display the below dialog message if there is new Firmware.
  • Page 65 4. After selecting Yes, a progress bar will appear as the update process begins. 5. After reaching 100% the projector will restart and the screen will turn to black for a few minutes. The whole process will take about 10 minutes. 6.
  • Page 66 Firmware Update by USB with FAT32 Format NOTE:  NTFS format, read only. 1. Download the latest version from the ViewSonic website and copy the file to a USB device. 2. Plug the USB into the projector, then go to: Home > Setting > Firmware Upgrade >...
  • Page 67 Advanced Settings 1. Select: Home > Setting > Advanced Settings. 13:00 Network Settings Basic Settings Date & Time Firmware Update Information Advanced Settings 2. Use the Up and Down buttons to select the desired option and press OK. Then use the Left and Right buttons to make adjustments or selections. 3.
  • Page 68 Menu Description Enter the desired input source directly after turning Power On Source on the projector. Power On/Off Ring Tone Enable or disable the power on/off ring tone. Auto Power Off The projector can turn off automatically after a set period of time once no input source is detected.
  • Page 69 Menu Description It is recommended that you use High Altitude Mode when your environment is between 1,500- 3,000 m above sea level, and a temperature between 5°C-25°C. High Altitude Mode NOTE:  If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating.
  • Page 70 Information 1. Select: Home > Setting > Information. 13:00 Network Settings Basic Settings Date & Time Firmware Update Advanced Settings Information 2. View system status and information. NOTE:  Press the Home button on the remote control to return to the Home Screen at anytime.

  • Page 71: Screen Mirroring

    Screen Mirroring Mirror your personal device’s screen. To setup wireless Screen Mirroring, see “Wireless Screen Mirroring” on page 25. NOTE:  Ensure your device is connected to the same network as the projector.
  • Page 72 Adding Apps Add your favorite Apps to the Home Screen. 1. From the Home Screen, select Add App and then press OK on the remote control. 2. Use the directional buttons to select the desired App and press OK.
  • Page 73 3. Now your favorite App will appear on the Home Screen.
  • Page 74 Delete Apps From the Home Screen 1. From the Home Screen, select the App you want to delete and press and hold OK for three (3) seconds. 2. The message, “Do you want to Delete this application from My Favorites?” will appear.

  • Page 75: Appendix

    Appendix Specifications Item Category Specifications Type 0.3” 720p, LED Display Size 40”~150” Throw Distance 0.94-3.52 m (42.6” @ 1 m) Lens F=1.7, f=7.4 mm Optical Zoom Fixed Digital Zoom 0.8x~1.0x Projector Light Source Type Light Source Life up to 30,000 hours (Normal) Display Color 1.07 Billion Colors...

  • Page 76: Timing Chart

    Timing Chart HDMI/USB C Video Timing Horizontal Dot Clock Vertical Timing Resolution Frequency Frequency Frequency (Hz) (kHz) (MHz) 480i 720(1440) x 480 15.73 59.94 480p 720 x 480 31.47 59.94 576i 720(1440) x 576 15.63 576p 720 x 576 31.25 720/50p 1280 x 720 37.5...

  • Page 77: Hdmi/Usb C Support Pc Timing

    HDMI/USB C Support PC Timing Horizontal Dot Clock Resolution Refresh Rate (Hz) Frequency (kHz) Frequency (MHz) 59.94 31.469 25.175 640 x 480 72.809 37.861 31.5 37.5 31.5 720 x 400 70.087 31.469 28.3221 56.250 35.156 60.317 37.879 800 x 600 72.188 48.077 46.875...

  • Page 78: 3D Support Timing

    3D Support Timing HDMI 3D (BlueRay 3D with info frame) Signal Resolution (dots) Aspect Ratio Refresh Rate (Hz) Support Frame Packing 1080p 1920 x 1080 16:9 23.98/24 720p 1280 x 720 16:9 50/59.94/60 Side by Side 1080i 1920 x 1080 16:9 50/59.94/60 Top and Bottom...

  • Page 79: Led Indicators

    LED Indicators Light Description Green Power On Stand-by Mode Flashing White Projector Charging Solid White Battery is Fully Charged...

  • Page 80: Troubleshooting

    Troubleshooting This section describes some common problems that you may experience when using the projector. Problem or Issue Possible Solutions • Ensure the power cord is properly attached to the projector and to the power outlet. • If the cooling process has not completed, please wait until it has finished then try to turn on the projector again.

  • Page 81: Maintenance

    • ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

  • Page 82: Regulatory And Service Information

    Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 83: Fcc Radiation Exposure Statement

    FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

  • Page 84: Ic Radiation Exposure Statement

    IC Radiation Exposure Statement This equipment complied with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The device for the band 5150-5825 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.

  • Page 85: Declaration Of Rohs2 Compliance

    Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance...

  • Page 86: Battery Warning

    Battery Warning • Battery: ͫ High or low extreme temperatures that a battery can be subjected to during use, storage or transportation; and low air pressure at high altitude. ͫ Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);...

  • Page 87: Indian Restriction Of Hazardous Substances

    Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic®...

  • Page 88: Copyright Information

    ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein;...

  • Page 89: Customer Service

    For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ www.viewsonic.com.cn www.viewsonic.com/hk/ 中国 (China) 香港 (繁體中文) Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/...

  • Page 90: Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
  • Page 91 (e) the serial number of the product. 3. Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. 4. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
  • Page 92 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

  • Page 93: Mexico Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &...
  • Page 94 Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based...
  • Page 95 Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.

This manual is also suitable for:

Vs19217

Table of Contents