Battery Installation - Fisher-Price POWER WHEELS MILITARY JEEP WRANGLER W0028 Owner's Manual

IMPORTANT! Use only a Power Wheels
with A-style connector and built-in thermal fuse. Use of
any other battery will damage your vehicle.
1
• Using a slotted screwdriver, turn each lock fastener
turn to the unlocked position.
• Lift the hood to access the battery compartment.
2
• Slide the battery retainer open.
• Place the battery in the battery compartment and
release the battery retainer.

BATTERY INSTALLATION

® 6 volt battery
Hood
Unlocked
Locked
/
1
Power Wheels ®
6 Volt Battery
Slide Battery
Retainer
GAP
Incorrect
3
• Plug the battery connector into the motor
harness connector.
Note: If the battery connector will not plug into the
motor harness connector, turn it over and try again!
4
Do not force the battery connector into the motor
harness connector.
4
• Lower the hood on the vehicle. Using a slotted
screwdriver, turn each lock fastener
locked position.
IMPORTANT! Remember to keep the lock fasteners
locked at all times to prevent children from accessing
the battery compartment.
13
Battery
Connector
Motor Harness
Connector
NO GAP
Correct
Hood
Unlocked
Locked
1 / turn to the
4
W0028pr-0920