Fisher-Price POWER WHEELS MILITARY JEEP WRANGLER W0028 Owner's Manual page 7

WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
1
FRONT VIEW
• Fit both tabs on the front end of the seat into the slots
on the inside of the vehicle.
2
• Insert a #10 x 1" (2,5 cm) screw into the back edge of
the seat. Tighten the screw.
W0028pr-0920
ASSEMBLY
Seat Tabs
Slots
#10 x 1" (2,5 cm) Screw
Hole
3
• Position the roll bar so that it bends toward the back
end of the vehicle.
• Insert and "snap" the roll bar into the large holes in
the top side of the vehicle, as shown.
• Pull up on the roll bar to be sure it is secure.
4
• Place the dashboard on top of the vehicle, as shown.
• Insert five #10 x 1" (2,5 cm) screws into the dashboard
and tighten.
7
Roll Bar
Hole
#10 x 1" (2,5 cm) Screws
Dashboard