Fisher-Price POWER WHEELS MILITARY JEEP WRANGLER W0028 Owner's Manual page 8

Steering Wheel
Large Opening
5
• Position the steering wheel with the large opening UP.
• Position the steering column so that the bend is UP,
as shown.
• Fit the steering column through the center hole in the
steering wheel.
End of Steering Column
6
• While holding the steering wheel, grasp the steering
column and push it up as far as it will go.
/
• Insert the 5 " (0,4 cm) x 1½" (3,8 cm) pin through the
32
hole in the end of the steering column.
ASSEMBLY
Large Opening UP
Steering Column
Bend
Upright
/
5 " (0,4 cm) x 1½" (3,8 cm)Pin
32
PUSH
#8 x ¾" (1,9 cm) Screws
Steering Wheel Cap
7
• Now, pull the steering column down to fit the pin into
the grooved area in the center of the steering wheel.
• Fit the steering cap into the center of the steering
wheel. Be sure to align the notch in the steering wheel
cap with the tab in the center of the steering wheel.
• Insert two #8 x ¾" (1,9 cm) screws into the steering
wheel cap and tighten.
Large Hole
in Dashboard
8
• Insert the steering column assembly into the large
hole in the dashboard. Make sure the bend in the
steering column is UP.
8
Steering Wheel
PULL
Steering
Column
Bend Up
W0028pr-0920