Appendix; Iv-1. Configuring Your Ip Address - Renkforce RF-AP-N300Mini User Manual

IV.

Appendix

IV-1. Configuring your IP address
For first time access to the URL
to use a dynamic IP address. This means your computer can obtain an IP address
automatically from a DHCP server. You can check if your computer is set to use a dynamic
IP address by following
address.
Static IP users can also temporarily modify your computer's IP address to be in the same
IP address subnet e.g. 192.168.9.x (x = 3 – 254) as the EW-7476RPC in order to access
http://renkforce.setup
The EW-7476RPC's default IP address is 192.168.9.2.
The procedure for modifying your IP address varies across different operating systems;
please follow the guide appropriate for your operating system in
the IP address of your
Static IP users please make a note of your static IP before you
change it.
You can assign a new IP address to the device which is within the subnet of your network
during setup or using the browser based configuration interface, so that you can access
http://renkforce.setup
the URL
Please remember to change your IP address back to its
original value after the device is properly configured.
http://renkforce.setup
VII-1-1. How to check that your computer uses a dynamic IP
.
computer.
in future without modifying your IP address.
please ensure your computer is set
57
IIV-1-2. How to modify