Ghz Wireless & 5Ghz Wireless; Iii-3-4-1; Basic - Renkforce RF-AP-N300Mini User Manual

III-3-4. 2.4GHz Wireless & 5GHz Wireless
In Access Point mode, the "Guest" feature in the menu is
replaced by "Access Control".

III-3-4-1.

Basic

The "Basic" screen displays settings for your primary 2.4GHz or 5GHz Wi-Fi network.
Band
Wireless Network Name
(SSID)
Hide SSID
The "2.4GHz Wireless" & "5GHz Wireless" menu allows you to
configure SSID and security settings for your Wi-Fi network
along with a guest Wi-Fi network. WPS, access control (in access
point mode) and scheduling functions can also be managed from
here.
Displays the wireless standard used for the
EW-7476RPC's "2.4GHz (B+G+N)" means that
802.11b, 802.11g, and 802.11n wireless clients can
connect to the EW-7476RPC.
This is the name of your Wi-Fi network for
identification, also sometimes referred to as "SSID".
The SSID can consist of any combination of up to 32
alphanumerical characters.
Enable or disable hide SSID. When disabled, the
SSID will be visible to clients as an available Wi-Fi
network. When enabled, the SSID will not be visible
as an available Wi-Fi network to clients – clients must
manually enter the SSID in order to connect. A
hidden (disabled) SSID is typically more secure than
a visible (enabled) SSID.
34