Renkforce RF-AP-N300Mini User Manual page 22

3.
Select whether to use the 5GHz wireless frequency, 2.4GHz wireless frequency or both.
If you are not sure, select both.
4.
Select "Obtain an IP address automatically" or "Use the following IP address" for
your EW-7476RPC. If you are using a static IP, enter the IP address, subnet mask and
default gateway. Click "Next" to proceed to the next step.
"Obtain an IP address automatically" is the recommended
setting for most users. For more guidance on static IP
addresses, please refer to V-1. Configuring your IP
19
address.