1. Manuals
  2. Brands
  3. Renkforce Manuals
  4. Repeater
  5. RF-AP-N300Mini
  6. User manual

Renkforce RF-AP-N300Mini User Manual

Ac1200 gigabit dual- band wi-fi repeater
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
AC1200 Gigabit Dual- Band Wi-Fi Repeater
Item No. EW-7476RPC

Advertisement

Table of Contents
loading

Related Manuals for Renkforce RF-AP-N300Mini

Summary of Contents for Renkforce RF-AP-N300Mini

  • Page 1 User Manual AC1200 Gigabit Dual- Band Wi-Fi Repeater Item No. EW-7476RPC...

  • Page 2: Table Of Contents

    CONTENTS Product Information ......................1 I-1. Package Contents ........................1 I-2. System Requirements ......................1 I-3. LED Status ..........................2 I-4. Switch ............................3 I-5. WPS Setup ..........................4 I-6. WPS Button with Wireless Scheduling .................. 4 I-7. Reset to Factory Default Settings ................... 5 I-8.
  • Page 3 IV-1-1. How to check that your computer uses a dynamic IP address .......... 58 IV-1-1-1. Windows 7 ..........................58 IV-1-1-2. Windows 8.1 & 10 ........................61 IV-1-1-3. Mac OS ............................ 64 IV-1-2. How to modify the IP address of your computer ..............66 IV-1-2-1.

  • Page 4: Product Information

    I. Product Information I-1. Package Contents EW-7476RPC CD with multi-language QIG & user manual Quick installation guide (QIG) Access key card RJ45 cable I-2. System Requirements Wi-Fi extender/Wi-Fi bridge mode: Existing 2.4GHz and/or 5GHz wireless network Access point mode: Cable/DSL modem router Computer with 802.11/b/g/n/a/ac Wi-Fi adapter, and web browser for software configuration (Internet Explorer, Google Chrome, Firefox, Opera or Safari latest version)

  • Page 5: I-3. Led Status

    I-3. LED Status All LEDs are disabled in green mode. The best signal strength is 60 – 80% since above 80% is likely too close to your router for the extender to be effective. Color Status Description Excellent location. Signal strength: 60 – 80% Slow Good location.

  • Page 6: I-4. Switch

    I-4. Switch The EW-7476RPC includes a hardware switch on the underside of the device which can switch between normal, green mode and sleep mode as shown in the table below. “Wi-Fi power” refers to the strength of the extender’s wireless radio signal (Tx). If you are using the extender in a small or medium sized space, you may not need the full power of the wireless radio.

  • Page 7: I-5. Wps Setup

    I-5. WPS Setup If your wireless router/access point supports WPS (Wi-Fi Protected Setup) then you can use this method to setup your wireless extender. Press the WPS button on your wireless router/access point to activate its WPS. Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button.

  • Page 8: I-7. Reset To Factory Default Settings

    I-7. Reset to Factory Default Settings If you experience problems with your extender or if you want to change the extender to a different operating mode, you can reset the device back to its factory settings. This resets all settings back to default.

  • Page 9: I-8. Safety Information

    I-8. Safety Information In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions. 1. The device is designed for indoor use only; do not place it outdoors. 2.

  • Page 10: Ii. Installation

    II. Installation The EW-7476RPC has three different operating modes: Wi-Fi Extender The device connects wirelessly to your existing network and repeats the wireless signal. Location: The best location for your extender is roughly in the middle between your existing wireless router/access point and the dead zone.
  • Page 11 If you are using a computer, please disconnect any Ethernet cables. Open a web browser and if you do not automatically arrive at the “Get Started” screen http://renkforce.setup shown below, enter the URL and click “Get Started” to begin the...
  • Page 12 If you cannot access http://renkforce.setup, please make sure your computer is set to use a dynamic IP address. For more information please refer to Appendix. To use a different operating mode, click “Change to a Different Mode”. Or select “Yes,...
  • Page 13 Follow the on-screen instructions for your selected mode to complete setup. You can configure the product for 2.4 GHz and/or 5GHz Wi-Fi. Refer to the appropriate chapter for each mode below if you need more help. For more advanced configurations, use the browser based configuration interface at http://renkforce.setup...

  • Page 14: Ii-1. Wi-Fi Extender Mode

    II-1. Wi-Fi Extender Mode Please ensure your EW-7476RPC is within Wi-Fi range of your existing wireless router. Click “Next” to continue. Select whether to use the 5GHz wireless frequency, 2.4GHz wireless frequency or both. If you are not sure, select both and then click “Next”.
  • Page 15 Select whether to enable Cross Band technology. This can help to maintain your router’s maximum speed capacity as the Wi-Fi signal is extended. Select the Wi-Fi network name (SSID) which you wish to connect to for the specified frequency and click “Next” to continue. If the Wi-Fi network you wish to connect to does not appear, try clicking “Refresh”.
  • Page 16 To connect to a hidden SSID, check the “Setup extender manually” box and enter the details manually on the next page, as shown below. Enter your existing wireless network’s security key/password in the “Security Key” field and click “Next” to continue. Device SSID will be the SSID of your extender’s Wi-Fi.
  • Page 17 Wait a moment while the EW-7476RPC tests the wireless connection and hit next. Select “Obtain an IP address automatically” or “Use the following IP address” for your EW-7476RPC. If you are using a static IP, enter the IP address, subnet mask and default gateway.
  • Page 18 If you selected to use both 2.4GHz and 5GHz wireless frequencies in step 2, then repeat steps 4 – 7 for the 5GHz wireless frequency. A summary of your configuration will be displayed, as shown below. Check that all of the details are correct and then click “Next” to proceed. The device will use the same wireless password/security key as the existing wireless network.
  • Page 19 If you wish to backup the EW-7476RPC’s settings, click “Backup this configuration” to save your current configuration to a .txt file. Please wait a moment until the EW-7476RPC is ready. A final congratulations screen will indicate that setup is complete. You can now connect to the device’s new SSID(s) which are shown on the screen then close the browser window.
  • Page 20 The EW-7476RPC is working and ready for use. Refer to V-2. Connecting to a Wi-Fi network if you require more guidance.

  • Page 21: Ii-2. Access Point Mode

    II-2. Access Point Mode Select “Access Point” from the top menu and click “Next”. Connect the network port of your EW-7476RPC to the LAN port of your existing router using an Ethernet cable, then click “Next”.
  • Page 22 Select whether to use the 5GHz wireless frequency, 2.4GHz wireless frequency or both. If you are not sure, select both. Select “Obtain an IP address automatically” or “Use the following IP address” for your EW-7476RPC. If you are using a static IP, enter the IP address, subnet mask and default gateway.
  • Page 23 Enter a name and password for your 2.4GHz & 5GHz wireless networks, then click “Next” to continue. A summary of your configuration will be displayed, as shown below. Check that all of the details are correct and then click “Next” to proceed. If you wish to backup the device’s settings, click “Backup this configuration”...
  • Page 24 Please wait a moment until the EW-7476RPC is ready. A final congratulations screen will indicate that setup is complete. You can now connect to the device’s new SSID(s) which are shown on the screen then close the browser window. The EW-7476RPC is working and ready for use. Refer to V-2.

  • Page 25: Ii-3. Wi-Fi Bridge Mode

    II-3. Wi-Fi Bridge Mode Select “Wireless Bridge” from the top menu and click “Next”. Please ensure your EW-7476RPC is within Wi-Fi range of your existing wireless router. Click “Next” to continue.
  • Page 26 Select the frequency (2.4GHz or 5GHz) of your existing wireless network. In wireless bridge mode, the EW-7476RPC can only connect to one wireless network/frequency i.e. 2.4GHz or 5GHz. Select the Wi-Fi network name (SSID) which you wish to connect to and click “Next” to continue.
  • Page 27 To connect to a hidden SSID, check the “Setup extender manually” box and enter the details manually on the next page, as shown below. Enter your existing wireless network’s security key/password in the “Security Key” field and click “Next” to continue.
  • Page 28 Wait a moment while the EW-7476RPC tests the wireless connection. Select “Obtain an IP address automatically” or “Use the following IP address” for your EW-7476RPC. If you are using a static IP, enter the IP address, subnet mask and default gateway. Click “Next” to proceed to the next step. “Obtain an IP address automatically”...
  • Page 29 A summary of your configuration will be displayed, as shown below. Check that all of the details are correct and then click “Next” to proceed. If you wish to backup the EW-7476RPC’s settings, click “Backup this configuration” to save your current configuration to a .txt file.
  • Page 30 A final congratulations screen will indicate that setup is complete. Please close the browser window. The EW-7476RPC is working and ready for use. You can now connect the EW-7476RPC to your network device using an Ethernet cable and connect to your network as usual.

  • Page 31: Iii. Browser Based Configuration Interface

    V-1. Configuring your IP address for more information. III-1. Login http://renkforce.setup To access the browser based configuration interface enter into the URL bar of a browser on a network device connected to the same Wi-Fi network as the EW-7476RPC. You will be prompted for a username and password. The default username is “admin”...
  • Page 32 You will arrive at the “Status and Information” screen. Use the menu down the left side to navigate.

  • Page 33: Iii-2. Save Settings

    III-2. Save Settings After you configure any settings, click the “Save Settings” button at the bottom of the screen to save your changes. The device needs to restart in order to bring any changes into effect. Then, click “Click here to restart” in order to restart the device and bring the changes into effect.

  • Page 34: Iii-3. Main Menu

    III-3. Main Menu The main menu displays different options depending on your device’s operating mode. Please refer to the following chapters for guidance on each mode. Wi-Fi Extender Access Point Wi-Fi Bridge III-3-1. Status The “Status” page displays basic system information about the device, arranged into categories.

  • Page 35: Setup Wizard

    Follow the on-screen wizard to setup your device in a different mode. Refer to II. Installation Step 3 onwards for help if needed. If you don’t see the “Get Started” screen, try reconnecting to the renkforceEXT.setup ** SSID and go to http://renkforce.setup in a web browser.

  • Page 36: Iii-3-3. Lan

    IP address from your router or assign an IP address manually. You can access the browser based configuration interface using the device’s IP address instead of using the URL http://renkforce.setup. IP Address Specify the IP address here. This IP address will be assigned to the EW-7476RPC and will replace the default IP address.

  • Page 37: Ghz Wireless & 5Ghz Wireless

    III-3-4. 2.4GHz Wireless & 5GHz Wireless The “2.4GHz Wireless” & “5GHz Wireless” menu allows you to configure SSID and security settings for your Wi-Fi network along with a guest Wi-Fi network. WPS, access control (in access point mode) and scheduling functions can also be managed from here.
  • Page 38 Enable Wireless Clients Check the box to enable wireless clients isolation. Isolation This prevents wireless clients connected to the EW-7476RPC from communicating with each other and improves security. Typically, this function is useful for corporate environments or public hot spots and can prevent brute force attacks on clients’...
  • Page 39 Wireless Security: Access Point Mode: Select an encryption type from the drop-down menu: “WPA Pre-shared Key” is the recommended and most secure encryption type.

  • Page 40: Iii-3-4-1-1

    III-3-4-1-1. Disable Encryption is disabled and no password/key is required to connect to the EW-7476RPC. Disabling wireless encryption is not recommended. When disabled, anybody within range can connect to your device’s SSID. Enable 802.1x Check the box to enable the 802.1x authentication. A Authentication RADIUS server is required to perform 802.1x authentication: enter the RADIUS server’s information...

  • Page 41: Iii-3-4-1-2. Wep

    III-3-4-1-2. WEP (Wired Equivalent Privacy) is a basic encryption type. For a higher level of security consider using WPA encryption. Key Length Select 64-bit or 128-bit. 128-bit is more secure than 64-bit. Key Format Choose from “ASCII” (any alphanumerical character 0-9, a-z and A-Z) or “Hex”...

  • Page 42: Iii-3-4-1-3

    III-3-4-1-3. WPA Pre-Shared Key WPA pre-shared key is the recommended and most secure encryption type. WPA Unicast Cipher Select from WPA (TKIP), WPA2 (AES) or WPA2 Mixed. Suite WPA2 (AES) is safer than WPA (TKIP), but not supported by all wireless clients. Please make sure your wireless client supports your selection.

  • Page 43: Iii-3-4-1-4

    III-3-4-1-4. WPA Radius WPA RADIUS is a combination of WPA encryption and RADIUS user authentication. If you have a RADIUS authentication server, you can authenticate the identity of every wireless client against a user database. WPA Unicast Cipher Select from WPA (TKIP), WPA2 (AES) or WPA2 Mixed. Suite WPA2 (AES) is safer than WPA (TKIP), but not supported by all wireless clients.

  • Page 44: Iii-3-4-2

    III-3-4-2. Guest You can setup an additional “Guest” Wi-Fi network so guest users can enjoy Wi-Fi connectivity without accessing your primary SSID. The “Guest” screen displays settings for your guest Wi-Fi network. The guest network is separate from your primary network. The settings for your primary network can be found in the “Basic”...
  • Page 45 for corporate environments or public hot spots and can prevent brute force attacks on clients’ usernames and passwords. Band Displays the wireless standard used for the EW-7476RPC’s frequency band: 2.4GHz (B+G+N): Allows 802.11b, 802.11g, and 802.11n wireless clients to connect to the EW-7476RPC. Channel Number Channel number for the guest network is the same as the main SSID and cannot be adjusted independently.

  • Page 46: Iii-3-4-3. Wps

    III-3-4-3. Wi-Fi Protected Setup is a simple way to establish connections between WPS compatible devices. WPS can be activated on compatible devices by pushing a WPS button on the device or from within the device’s firmware/configuration interface. When WPS is activated in the correct manner and at the correct time for two compatible devices, they will automatically connect.

  • Page 47: Iii-3-4-4

    settings. Configure via Push Click “Start PBC” (Push-Button Configuration) to Button activate WPS on the access point. WPS will be active for 2 minutes. Configure via Client Enter the wireless client’s PIN code here and click PIN Code “Start PIN” to activate PIN code WPS. Refer to your wireless client’s documentation if you are unsure of its PIN code.
  • Page 48 Client PC Select a PC name from the drop-down list and click “>>” to add enter it into the blank field to the right. Click “Refresh’ in the drop-down menu to refresh the list of available MAC addresses. If the address you wish to add is not listed, enter it manually.

  • Page 49: Iii-3-4-5

    III-3-4-5. Schedule When Cross-Band is enabled, wireless scheduling is reversed according to frequency. Your 2.4GHz schedule will apply to your extender’s 5GHz network and vice-versa. The schedule feature allows you to automate the wireless radio to switch off at specified times.
  • Page 50 Use the dropdown to select which day(s) to include in the schedule. Check “Every Day” as a shortcut for an every day schedule. Specify a start and end time (hour and minute) for the wireless off schedule using the drop-down menu. Add the schedule to the table of active schedules.

  • Page 51: Advanced

    III-3-5. Advanced Advanced features of the EW-7476RPC can be configured from the “Advanced” menu. III-3-5-1. 2.4GHz Wireless These settings are for experienced users only. Please do not change any of the values on this page unless you are already familiar with these functions. Fragment Threshold Set the Fragment threshold of the wireless radio.
  • Page 52 DTIM Period Set the DTIM period of wireless radio. The default value is 3. Data Rate Set the wireless data transfer rate. The default is set to Auto. N Data Rate Set the data rate of 802.11n. The default is set to Auto.

  • Page 53: Iii-3-5-2

    III-3-5-2. 5GHz Wireless These settings are for experienced users only. Please do not change any of the values on this page unless you are already familiar with these functions. Fragment Threshold Set the Fragment threshold of the wireless radio. The default value is 2346. RTS Threshold Set the RTS threshold of the wireless radio.
  • Page 54 Preamble Type Set the wireless radio preamble type. The default value is “Short Preamble”. CTS Protect Enabling this setting will reduce the chance of radio signal collisions between 802.11b and 802.11g wireless access points. It’s recommended to set this option to “Auto”. Tx Power Set the power output of the wireless radio.

  • Page 55: Administration

    III-3-6. Administration Various administrative functions can be accessed from the “Administration” menu. III-3-6-1. Wireless Range extender mode only You can adjust the level of wireless output power as a percentage. Depending on the size of your location and required coverage, you may not require 100% output power. Reducing the output power can enhance security since your Wi-Fi signal will not extend to potential malicious/unknown users in distant areas.

  • Page 56: Iii-3-6-2

    III-3-6-2. Time Zone Set Time Zone Select the time zone of your country or region. Time Server Address The travel router supports NTP (Network Time Protocol) for automatic time and date setup. Input the host name of the IP server manually. Daylight Saving If your country/region uses daylight saving time, please check the “Enable Function”...

  • Page 57: Iii-3-6-3

    III-3-6-3. Password You can change the password used to login to the browser-based configuration interface here. It is advised to do so for security purposes. Please make a note of the new password. In the event that you forget the password and are unable to login to the browser based configuration interface, see I-6.

  • Page 58: Iii-3-6-4

    III-3-6-4. Backup/Restore Backup Settings Click “Save” to save the current settings on your computer as config.bin file. Restore Settings Click “Browse” to find a previously saved config.bin file and then click “Upload” to replace your current settings. Restore to Factory Click “Reset”...

  • Page 59: Restart

    III-3-6-5. Restart In the event that the router malfunctions or is not responding, then it is recommended that you restart the device.

  • Page 60: Appendix

    Appendix IV-1. Configuring your IP address http://renkforce.setup For first time access to the URL please ensure your computer is set to use a dynamic IP address. This means your computer can obtain an IP address automatically from a DHCP server. You can check if your computer is set to use a dynamic IP address by following VII-1-1.

  • Page 61: Iv-1-1. How To Check That Your Computer Uses A Dynamic Ip Address

    IV-1-1. How to check that your computer uses a dynamic IP address Please follow the instructions appropriate for your operating system. IV-1-1-1. Windows 7 Click the “Start” button (it should be located in the lower-left corner of your computer), then click “Control Panel”. Under “Network and Internet”...
  • Page 62 Click “Local Area Connection”. Click “Properties”.
  • Page 63 Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically” should be selected.

  • Page 64: Iv-1-1-2. Windows 8.1 & 10

    IV-1-1-2. Windows 8.1 & 10 In desktop mode, click the File Explorer icon in the bottom left of the screen, as shown below. Right click “Network” and then select “Properties”.
  • Page 65 In the window that opens, select “Change adapter settings” from the left side. Choose your connection and right click, then select “Properties”.
  • Page 66 Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically” should be selected.

  • Page 67: Iv-1-1-3. Mac Os

    IV-1-1-3. Mac OS Have your Macintosh computer operate as usual, and click on “System Preferences”. In System Preferences, click on “Network”. Click on “Wi-Fi” in the left panel and then click “Advanced” in the lower right corner.
  • Page 68 Select “TCP/IP” from the top menu and “Using DHCP” in the drop down menu labeled “Configure IPv4” should be selected.

  • Page 69: Iv-1-2. How To Modify The Ip Address Of Your Computer

    IV-1-2. How to modify the IP address of your computer Please follow the instructions appropriate for your operating system. In the following examples we use the IP address 192.168.9.20 though you can use any IP address in the range 192.168.9.x (x = 3 – 254) in order to access iQ Setup/browser based configuration interface.
  • Page 70 Click “Local Area Connection”. Click “Properties”.
  • Page 71 Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”. Select “Use the following IP address”, then input the following values: Your existing static IP address will be displayed in the “IP address” field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses.

  • Page 73: Iv-1-2-2. Windows 8.1 & 10

    IV-1-2-2. Windows 8.1 & 10 In desktop mode, click the File Explorer icon in the bottom left of the screen, as shown below. Right click “Network” and then select “Properties”.
  • Page 74 In the window that opens, select “Change adapter settings” from the left side. Choose your connection and right click, then select “Properties”.
  • Page 75 Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”. Select “Use the following IP address”, then input the following values: Your existing static IP address will be displayed in the “IP address” field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses.

  • Page 76: Iv-1-2-3. Mac

    IV-1-2-3. Have your Macintosh computer operate as usual, and click on “System Preferences” In System Preferences, click on “Network”. Click on “Wi-Fi” in the left panel and then click “Advanced” in the lower right corner. Select “TCP/IP” from the top menu and select “Manually” from the drop down menu labeled “Configure IPv4”, then click “OK”.
  • Page 77 Your existing static IP address will be displayed in the “IP address” field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. In the “IPv4 Address” and “Subnet Mask” field enter IP address 192.168.9.20 and subnet mask 255.255.255.0.

  • Page 78: Iv-2. Connecting To A Wi-Fi Network

    Click “Apply” to save the changes. IV-2. Connecting to a Wi-Fi network renkforce.setup For help connecting to your device’s SSID for initial setup, or to connect to your device’s new Wi-Fi network (SSID) after setup is complete, follow the guide below: Below is an example of how to connect using Windows Vista –...
  • Page 79 Search for the SSID of your EW-7478RPC and then click “Connect”. If you set a password for your network, you will then be prompted to enter it. After correctly entering your password, you will be successfully connected to the EW-7476RPC’s wireless network.

  • Page 80: Iv-3. Troubleshooting

    2 minutes and try again. b. Make sure you are using the full, correct URL: http://renkforce.setup c. If you are using a MAC or IP address filter, try to connect the wireless extender using a different computer.
  • Page 81 as it is safely possible to do so. Call your dealer of purchase for help. My network device can’t a. Ensure that your broadband router is fully functional. access the Internet. b. Switch off both your network device and wireless extender and switch back on again.
  • Page 82 COPYRIGHT Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
  • Page 83 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 84 Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type AC1200 Dual-Band Wireless LAN Repeater is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/ Safety This equipment is designed with the utmost care for the safety of those who install and use it.
  • Page 85 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Toto zaří zení je v souladu se základní mi po žadavky a ostatní...
  • Page 86 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: AC1200 Dual-Band Wireless LAN Repeater Model No.: EW-7476RPC The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum EN 300 328 V2.1.1 (2016-11)
  • Page 87 Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
  • Page 88 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a ‘“work based on the Program’“...
  • Page 89 to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making...
  • Page 90 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.

This manual is also suitable for:

Ew-7476rpc

Table of Contents