Table of Contents
Advertisement
Configure via Push
Button
Configure via Client
PIN Code
III-3-4-4.
Access Control
Access Control is a security feature that can help to prevent unauthorized users from
connecting to your wireless router.
This function allows you to define a list of network devices permitted to connect to the
EW-7476RPC. Devices are each identified by their unique MAC address. If a device which is
not on the list of permitted MAC addresses attempts to connect to the EW-7476RPC, it will
be denied.
To enable this function, check the box labeled "Enable Wireless Access Control".
settings.
Click "Start PBC" (Push-Button Configuration) to
activate WPS on the access point. WPS will be active
for 2 minutes.
Enter the wireless client's PIN code here and click
"Start PIN" to activate PIN code WPS. Refer to your
wireless client's documentation if you are unsure of its
PIN code.
Access Point mode only
44
Advertisement
Table of Contents
