Iii-3-3. Lan - Renkforce RF-AP-N300Mini User Manual

III-3-3. LAN

You can configure your Local Area Network (LAN) on this page. Set the device to
automatically obtain an IP address from your router or assign an IP address manually.
You can access the browser based configuration interface
using the device's IP address instead of using the URL
http://renkforce.setup.
IP Address
Subnet Mask
Default Gateway
Address
DNS Address
Specify the IP address here. This IP address will be
assigned to the EW-7476RPC and will replace the
default IP address.
Specify a subnet mask. The default value is
255.255.255.0
Enter a default gateway address.
Enter a DNS address.
33