Table of Contents
Advertisement
In order to avoid finger prints and thus grease on the tubes, we recommend wearing cloth gloves when
working with the UVC tubes.
Always wear cloth gloves when changing UVC tubes.
The tightness of the UVC system depends to a large extent on the O-rings and their care. O-rings are
frequently damaged during tube replacement. In addition, the tube-side rings suffer from very intense UVC
radiation. Therefore, a careful check of the O-rings is recommended at every change. In sensitive areas, the
O-rings on the tube side should be replaced as often as possible.
Replacing the O-rings is recommended every time the tubes are replaced. The O-rings
should at least be subject to a detailed visual inspection.
Maintenance of the components
The quartz glass of the UVC tube has to be regularly checked and maintained. We recommend a soft, lint-
free cleaning cloth. Caution: The UVC tube is made of quartz glass and is fragile! You should wear thin
cloth gloves when cleaning it, in order to avoid injuries and also so as to not immediately contaminate the
UVC tube with fingerprints. Due to soiling and calcification the performance decreases sharply. Regular
inspections and fixed cleaning intervals are recommended. New installations should be checked more
frequently (hourly) to get a feel for the intervals.
The UVC tubes can be freed from possible calcifications and other soiling by means of decalcifying and
cleaning agents. For the metal parts, we recommend a standard stainless steel care product.
To avoid greasy deposits, never touch the UVC tubes with bare hands! Fingerprints form an almost
impenetrable layer for ultraviolet radiation. Therefore, before using the system for the first time, cleaning
the tube surface with an alcohol-containing agent is recommended.
Original Accessories and replacement parts
UVpro systems contain only high-quality components. This is the only way to ensure consistent high
performance and quality. For a long service life and reliability, we ask you to read through all instructions
closely before handling and operating these components. When procuring spare parts please make sure that
they are original parts from UVpro or orca GmbH. We also recommend purchasing accessories from UVpro
as well. Incorrect use of the equipment, or the use of unauthorized components can lead to health and
property damage!
orca GmbH
www.orcagmbh.de
Entkeimungsbox EKB 100
Seite 17 von 20
Advertisement
Table of Contents
