INSTALLATION
Safety instructions
UVC rays lead directly to painful damage of the cornea and redness of skin.
Never look into a luminous UVC source without protection! This UVC radiation damages
the cornea: Eyes and skin must therefore be protected. It is possible that the effects only
appear after a few hours have passed.
In cases of emergency, see a doctor!
Installation Information
The UVpro EKB 100 was carefully tested before delivery and subjected to a functional check. The high-quality
packaging is intended to prevent transport damage, but even with careful handling, damage cannot be
completely avoided. Possible transport damage relates in particular to the UVC tubes made of quartz glass.
Inspect the UVC tubes and the potted tube sockets before installation. Check that the cables are not
damaged. Check the completeness of the delivery.
Check the completeness of the delivery. If there are parts missing or mounted
incorrectly, the unit cannot be taken into operation.
The unit is delivered pre-finished. Only the electrical connection has to be established.
UVpro units should only be installed with an intact cable.
Check cable and connecting elements before installation.
Cleaning
After spillage of liquids or soiling the interior by other food residues (crumbs, fat etc.) it should be cleaned
with a damp cloth. The grating-intermediate bottom can be removed for this purpose.
orca GmbH
www.orcagmbh.de
Entkeimungsbox EKB 100
Seite 11 von 20