Table of Contents
Advertisement
Electrical connection
The electrical connection of the tape disinfector has to be carried out according to the relevant regulations
(EN 60 598-1) by authorized specialist personnel.
For system monitoring, we recommend the connection via a UVpro CU1 module or for the operation of
several devices via the UVpro UVC-Line 8/16/24 system. Otherwise a direct main connection via socket
230 V
±10 %
is fused with a 30 mA protective switch.
AC
The device may only be connected by a specialist (electrician).
The circuit is to be protected with a residual current circuit breaker (30 mA)..
TO BE AWARE OF WHILE IN USE
After the device has been assembled and positioned, no further work is required. If the device gets dirty it
must be properly and thoroughly cleaned. The most important thing is that the UVC pipes don't collect dirt,
since this gravely affects its sterilizing abilities.
After 6,000 working hours, the tubes are working at ca. 75% of their original power. Replacing the tubes is
now necessary. (See chapter 7.2 „Operating time of tubes").
OPERATION OF THE UVC DISINFECTION BOX
General
The UVpro EKB sterilization box is ideal for reliable sterilization of work equipment, tools or other objects
which must be placed in sensitive areas. It minimizes the risk of contamination of lunch-boxes, beverage
bottles, mobile phones, power drills and screwdrivers, etc. by viruses, bacteria, yeasts and mold spores. To
avoid performance drop due to shades, place objects with an appropriate distance next to each other.
After closing the door, the red power switch should be operated.
The exposure time can be set with the rotary potentiometer. In case of doubt choose the highest value. The
UV radiators will be switched on by pushing the green button.
orca GmbH
www.orcagmbh.de
Entkeimungsbox EKB 100
Seite 12 von 20
Advertisement
Table of Contents
