Features and Benefits Features Connectors Package Contents 1 x QS-PCIE-100 Card 1 x Bracket with two DB9 male serial ports 1 x Driver CD System Requirements Windows® 2000/XP/Server 2003/Vista PCI Express-enabled system with an available PCI Express slot May/07 Compliant with PCI Express Base Specification 1.0a...
Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
Insert the Driver CD, type in the following path D:\Drivers\PCIExpress\QS-PCIE-100\2000, then click OK. (Change D: to match your CD-ROM driver letter) Click Next and Finish. Restart Windows to complete the installation. For Windows® XP At the Found New Hardware Wizard, select Install from a list or specific location (Advanced), then click Next.
Insert the Driver CD, check Include this location in the search, uncheck the other box, type in following path D:\Drivers\PCIExpress\QS-PCIE-100\2003, then click OK. (Change D: to match your CD-ROM drive letter) If the Hardware Installation window pops up, click Continue Anyway, then Finish.
signed, select the option Install this driver software anyway. Click on Close to complete the driver installation. To Verify Windows® Driver Installation Right click My Computer, then click Manage. Click Device Manager. Click on the +(plus sign) in front of Ports(COM & LPT), four MosChip PCI Serial Port …...
Page 7
Click OK, then close Device Manager to save the changes. Follow steps 1-4 again to change the other three serial ports if needed. May/07 MN2000000068...