Multitech MultiModem ZPX Quick Start Manual page 5

Internal isa data/fax modem

Hide thumbs Also See for MultiModem ZPX:

Table of Contents

MultiModem ZPX Quick Start Guide

The MultiModem only uses IRQs 3,4, and 5 so you need to check in the above screen

to see if any of these IRQs are available. The MultiModem is defaulted to IRQ 5.

Record the available IRQ that you are going to use ___________.

Click I/O to display the available I/O addresses.

The MultiModem uses the following I/O addresses:

COM1: 3F8-3FF

COM2: 2F8-2FF

COM3: 3E8-3EF

COM4: 2E8-2EF

and defaults to COM 4.

Record the available I/O address that you are going to use ______________.

Table of Contents

Need help?

Do you have a question about the MultiModem ZPX and is the answer not in the manual?

Mt5634zpx