Beko BINA 090 Installation Manual page 30

6 Outdoor unit installation
If the drain joint doesn't come with a rubber seal (see Fig. 6.4 - B), do the following:
1. Insert the drain joint into the hole in the base pan of the unit. The drain joint will click in place.
2. Connect a drain hose extension (not included) to the drain joint to redirect water from the unit
during heating mode.
In cold climates
A
In cold climates, make sure that the drain hose is as vertical as possible to ensure swift
water drainage. If water drains too slowly, it can freeze in the hose and flood the unit.
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or to a wall-mounted bracket.
Unit mounting dimensions
The following is a list of different outdoor unit sizes and the distance between their mounting feet.
Prepare the installation base of the unit according to the dimensions below.
30 / 108 EN
Base pan hole of
outdoor unit
Seal
Seal
Drain joint
(A)
Fig. 6.4
Split-type room air conditioner / Installation Manual
(B)