Maximum Value; Diameter; Intermediate Height - Endress+Hauser Levelflex FMP50 Operating Instructions Manual

Levelflex FMP50 PROFIBUS PA

Maximum value

Navigation
Prerequisite
User entry

Diameter

Navigation
Prerequisite
User entry
Additional information

Intermediate height

Navigation
Prerequisite
User entry
Additional information
Endress+Hauser
 Setup → Advanced setup → Linearization → Maximum value
Linearization type (→  142) has one of the following values:
• Linear
• Pyramid bottom
• Conical bottom
• Angled bottom
• Horizontal cylinder
• Sphere
–50 000.0 to 50 000.0 %
 Setup → Advanced setup → Linearization → Diameter
Linearization type (→  142) has one of the following values:
• Horizontal cylinder
• Sphere
0 to 9 999.999 m
The unit is defined in the Distance unit parameter (→  122).
 Setup → Advanced setup → Linearization → Intermed. height
Linearization type (→  142) has one of the following values:
• Pyramid bottom
• Conical bottom
• Angled bottom
0 to 200 m
H Intermediate height
H
0%
Operating menu



A0013264
145