Operation Using The On-Site Display Vu - Endress+Hauser prosonic M FMU 40 Operating Instructions Manual

Operation
ENDRESS + HAUSER
– + E
F
O
...
S
...
24
5.4

Operation using the on-site display VU 331

X
X
2 x
X
F
O
S
Change from Measured Value Display to Group Selection by pressing F.
1.
Press S or O to select the required Function Group and confirm by pressing F.
2.
The active selection is marked by a
Activate Edit mode with O or S .
3.
Selection menus
a. Select the required Parameter in selected function with S oder O .
b. F confirms selection;
c. F confirms the edited value; system quits edit mode.
d. O and S (= Q) interrupts selection; system quits edit mode.
Typing in numerals and text
a. Press O or S to edit the first character of the numeral / text.
b. F positions the cursor at the next character; continue with a. until you have
completed your input.
c. If a ↵ symbol appears at the cursor, press F to accept the value entered; system
quits edit mode.
d. If a ← symbol appears at the cursor, press F to return to the previous character
(e.g. for correction of entries).
e. O and S (= Q) interrupts selection; system quits edit mode.
Press F to select the next function.
4.
Press O and S (= Q) once; return to previous function.
5.
Press O and S (= Q) twice; return to Group Selection.
Press O and S (= Q) to return to Measured value display.
6.
Prosonic M FMU 40/41/43 with HART and 4 ... 20 mA
X
F
O
S
in front of the menu text.
appears in front of the selected parameter.
>3 s
...
L00-FMU4xxxx-19-00-00-en-018