Firmware Dialog - Quantum Scalar 10K User Manual

Note
Press the
button or the
button to
scroll between
drives.
September 2007

Firmware Dialog

Path: Main Menu Status Drives Firmware
Use the Firmware Submenu to view the drive and drive
controller, boot or control firmware revisions. See Figure 4-41.
Enter Desired
Coord: D 01< 1 A 01
Index: DT 01200
Accept: N
Figure 4-41

Firmware Dialog

Parameters
Coord
Index
Accept
If Y is selected, the Response Screen appears. See
Figure 4-42. Otherwise, the changed parameters
continue to display but no action is taken.
Drive: DT 0006
Brick: 18N2
Boot: 120A.0002
Ctrl: 130A.0002
Figure 4-42 Selected Drive Firmware Revision
Description
The first field displays the type
of cell (D for Drive)
The second field displays the
rack number (01–16)
The third field displays the
drive bay section (1–4)
The fourth field displays the
column of the section (A –B)
The fifth field displays the row
of the column (01–6)
The device address associated
with the selected coordinate
parameter DT = data transfer
device
Y to accept
N to reject
<
Status Menu 4-37