Safety Information; Laws Pertaining To Spark Arrestors; Operating Safety - Crown WBT36 Operator's Safety And Service

www.crownequip.com
(204) 831 8468
This manual contains DANGER, WARNING, CAUTION, and NOTE callouts
which must be followed to reduce the possibility of personal injury, damage to
the equipment, or improper service.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol, CAUTION indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
Note: Contains additional information important to a procedure.

2.1 Laws Pertaining to Spark Arrestors

Notice: State Health Safety Codes and Public Resources Codes specify that in certain
locations spark arresters be used on internal combustion engines that use
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental
discharge of sparks or flames from the engine exhaust. Spark arresters are
qualified and rated by the United States Forest Service for this purpose.
In order to comply with local laws regarding spark arresters, consult the engine distributor
or the local Health and Safety Administrator.

2.2 Operating Safety

WARNING: Familiarity and proper training are required for the safe operation
of equipment. Equipment operated improperly or by untrained personnel can
be dangerous. Read the operating instructions contained in both this manual
and the engine manual and familiarize yourself with the location and proper
use of all controls. Inexperienced operators should receive instruction from
someone familiar with the equipment before being allowed to operate the
machine.