Optional Weights; Lifting; Storage - Crown WBT36 Operator's Safety And Service

www.crownequip.com
(204) 831 8468

5.10 Optional Weights

To install optional weights, place equal number of weights in both front and rear of guard
ring in designated area. Tighten screw to keep weights in place.
WARNING: Under no circumstances should any object be used as additional
weight other than the weights recommended by us. The use of unauthorized
weights could lead to personal injury or machine damage.

5.11 Lifting

See Graphic 16
See Technical Data for the weight of the machine.
To lift the machine manually:
5.11.1 Stop engine.
5.11.2 Obtain a partner and plan the lift.
5.11.3 Balance the weight between the partners and lift the machine by the guard ring (a).
WARNING: To reduce risk of back injury while lifting, keep your feet flat on ground
and shoulder width apart. Keep your head up and back straight.

5.12 Storage

If trowel is being stored for more than 30 days:
● Change engine oil.
● Drain fuel from engine.
● Remove spark plug and pour 15 ml (½ ounce) of SAE 30 engine oil into the cylinder.
Replace spark plug and crank engine to distribute oil. Refer to engine manual.
● Clean dirt from cylinder, cylinder head fins, blower housing, rotating screen, and
muffler areas to save space, place handle in its storage position.
● Cover trowel and engine and store in a clean, dry area.
Graphic 16