Controls; Engine Switch Handle; Before Starting; To Start - Crown WBT36 Operator's Safety And Service

www.crownequip.com
(204) 831 8468

4.6 Controls

See Graphic 3
Ref. Description
A Throttle
B
Engine switch
handle
C Twist pitch control
or pitch control

4.7 Engine Switch Handle

See Graphic 3
When the engine switch handle (b) is pressed, the engine will shut off.
To prevent uncontrolled spinning of the trowel, the engine control module is designed to
shutoff the engine under certain conditions. For example, if the operator loses his/her grip on
the trowel, the engine control module will sense that the machine is spinning and shut off the
engine. The momentum of the spinning trowel will engage the brake and stop the handle from
spinning past 270°.

4.8 Before Starting

Before starting trowel, check the following:
● oil level in engine
● oil level in gearbox
● fuel level
● condition of air filter
● condition of fuel lines
4.9

To Start

See Graphic 3, 5
4.9.1 Open fuel valve by moving lever to the right (g1).
Note: If engine is cold, move choke lever to closed position (i1). If engine is hot, set choke
to open position (i2).
4.9.2 Turn engine switch to "ON" (h1).
4.9.3 Move the throttle lever to the idle position (a1).
Ref. Description
D Handle height
adjustment (if
equipped)
● condition of trowel arms and blades
● condition of ring guard
● label descriptions
● handle height to suit operator