Table of Contents
Advertisement
AXIS Q6055-C PTZ Network Camera
Technical specifications
Power button
Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See page 60.
Connectors
Multiconnector
Terminal connector for connecting the supplied media converter switch, which provides the following signals:
•
DC Power
•
Network (Ethernet 10/100Base-T)
•
Input/Output (I/O)
Multicable connectors
Note
The supplied multicable is required in order to maintain the camera's NEMA/IP rating.
The multicable is connected to the camera's multiconnector, see Hardware overview on page 7 .
The wires are connected to the supplied media converter switch, see AXIS T8607 Media Converter Switch on page 9 .
The cable provides the following signals:
•
DC power to camera
•
Network (Ethernet 10/100Base-T)
•
Input/Output (I/O)
Multicable overview
1
Power wire (red)
2
Digital I/O wire (blue)
3
Ethernet wire (green/white)
4
Ethernet wire (green)
5
Ethernet wire (orange/white)
6
Ethernet wire (orange)
7
Digital I/O wire (yellow)
8
Ground wire (black)
9
Power wire (red)
10 Ethernet wire foil shield (2x)
66
Advertisement
Table of Contents
