Axis 0942-001 User Manual page 36

AXIS Q6055-C PTZ Network Camera
About detectors
1. Choose Area of interest from the drop-down list. Set the virtual area to detect if an object has disappeared from this
area of interest.
Important
When configuring Object size the view shall be zoomed out to Wide position.
2. Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will
detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
3. Use the Sensitivity slidebar to define how sensitive the detection should be. The lower sensitivity selected on the Sensitivity
bar, the greater difference in luminance is needed between the object and the background for the detector to be activated.
See the online help
Enter/Exit Detector
Enter/Exit Detector is used to trigger an alarm if an object within a pre-defined area of interest has entered or left the area.
Do the following to set the detector:
Note
Use the Drawing Opacity slidebar to define how transparent the area of interest or object size shape should be. Note
that this change will not be saved.
1. Choose Area of interest in the drop-down list. Set the virtual area to detect moving if any objects are entering or
exiting the area of interest.
Important
When configuring Object size the view shall be zoomed out to Wide position.
2. Choose Object size in the drop-down list. Set the size limits of the object that should be detected. The camera will detect
any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
for more information.
36