Table of Contents
Advertisement
Steps
1. Insert the I/O board at a 45 degree angle into the slot on the system board.
2. Align the screw holes on the I/O board with the screw holes on the system board.
3. Install the two screws (M2x4) that secure the I/O board to the system board.
Next steps
1. Install the
system
board.
2. Install the
memory
module.
3. Install the
wireless
card.
4. Install the
solid-state
5. Install the
rear
cover.
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
rear
cover.
5. Remove the touchpad.
6. Remove the
display
assembly.
7. Remove the
solid-state
8. Remove the
memory
module.
9. Remove the
wireless
card.
10. Remove the speakers.
48
Removing and installing components
drive.
After working inside your
Before working inside your
drive.
computer.
computer.
Advertisement
Table of Contents
