Blaupunkt LS180 Owner's Manual page 11

Trouble shooting
1. The speaker cannot turn on.
a. Please check if the power connection is correct.
2. No sound output.
a. Please try to adjust the volume knob, mute button and check the play source.
b. please contact service center for support if the issue remained.
3. Sound distortion.
a. Please try to adjust and play the music at a lower volume level.
b. Check the status of treble/bass setting.
c. Please try to decrease the volume level on outsourcing player like TV etc.
4. The sound is sounding intermittently in Bluetooth mode.
a. Please try to move the Bluetooth device closer to Soundbar.
b. Please try to repair the soundbar with Bluetooth device.
5. There is no sound output in optical or HDMI(ARC) mode.
a. Please check if there was connected properly between soundbar and device.
b. Please make sure that your TV has HDMI(ARC) compliant, and appropriate port was connected. Please set up the TV to HDMI
ARC(CEC).
c. Set up audio output mode of TV to PCM format.
Specifications
General
Power requirements: AC110~ 240V 50/60Hz
Power consumption (on mode): 120 Watt
Standby power consumption :< 0.5 Watt
Output power RMS: 100 Watt (20W x 2 + 30W x 2 woofer)
Total harmonic distortion: <1% (1 kHz, 1W)
Audio input sensitivity: 800mV
Frequency response: 70Hz – 20 KHz
USB support music: MP3/WAV
USB support device: up to 32GB max.
Soundbar dimensions: 960 x 112 x 70 mm (W x H x D)
Speakers
Soundbar driver impedance: 8Ω *2; 5.2*7.5CM
Woofer impedance: 8Ω*2; 3inch
Bluetooth
Bluetooth version: V5.0
Work range: approx.10 meters
Transmission frequency: 2.402~2.480GHz
Protocols: A2DP/AVRCP
(Notes: the product spec may change without prior notice).
Accessories
Remote Control x 1pcs
Remote control battery x 1 pair
Instruction Manual x 1pcs
Warranty card x 1 pcs
Audio cable (3.5mm stereo to RCA) x 1pcs
L shaped wall mount bracket x 2pcs
Double-sided glue tape x 2pcs
Wall mount screw: 4pcs x ST4 *35MM + 4pcs x plastic screw anchor
9