Table 2-6 Density Led Functionality - Quantum DLT 4000 Product Manual

Hardware Implementation
LED LED Color
Operate Handle Green
Density LED Description
(Amber)
2.6 On = Tape is recorded in 2.6 GB format.
Blinking = Tape is being forced by operator to record in this density; 2.6 GB
has been selected for a WRITE from BOT.
6.0 On = Tape is recorded in 6.0 GB format.
Blinking = Tape is being forced by operator to record in this density; 6.0 GB
has been selected for a WRITE from BOT.
10.0 / 15.0 On = Tape is recorded in 10.0 GB (DLTtape III cartridge) / 15.0 GB (DLTtape
IIIxt cartridge) format.
Blinking = Tape is being forced by operator to record in this density, 10.0
GB / 15.0 GB has been selected for a WRITE from BOT.
20.0 On = Tape is recorded in 20.0 GB (DLTtape IV cartridge) format.
Blinking = Tape is being forced by operator to record in this density, 20.0 GB
has been selected for a WRITE from BOT.
Note that these LED's operate only if the correct media is loaded in the drive. For example,
the default density of a DLTtape IV cartridge is 20.0 GB; if you are using a DLTtape IV
cartridge, the density must be set to 20.0 GB. If you set the density to a different setting, the
LED's do not light and the density function does not work properly.
2-20
Table 2–5 LED Functionality (continued)
Description
On = Insert/Release handle can be operated.
Off = Do not operate Insert/Release handle.
Blinking = Close the Insert/Release handle and wait for
Operate Handle LED to light steadily.
Table 2–6 Density LED Functionality
Quantum DLT 4000 Tape Drive