1.2
PRODUCT FEATURES
The DLT 4000 tape drive offers the following product features:
20.0 GB Native, 40.0 GB Compressed Capacity (Formatted capacity
assuming a 2:1 data compression ratio. Note that actual compression ratio
depends on the type of data, SCSI bus limitations, and system
configuration.)
Superior Error Detection and Correction
Extensive Embedded Diagnostic/Self-Test Software
Tape-Loadable Firmware
1.3
PRODUCT SPECIFICATIONS
The following subsections contain full specifications for the Quantum DLT 4000
tape drive. Specifications for the DLTtape
included.
1.3.1 Physical Specifications
The following table provides physical dimensions for the DLT 4000.
Dimension
Rackmount
Height
3.25 in. (8.26 cm) without front
bezel; 3.40 in (8.64 cm) with front
bezel.
Width
5.70 in. (14.48 cm) behind front
bezel; 5.84 in (14.83 cm) with front
bezel.
Depth
9.00 in. (22.86 cm) measured from
back of front bezel; 9.60 in. (24.38
cm) including front bezel
Typical Weight:
6 lb., 7 oz (2.9 kg)
Note: Mounting hole pattern for the bottom and sides of the drive is industry standard.
Table 1–1 DLT 4000 Physical Dimensions
Quantum DLT 4000 Tape Drive
General Description and Specifications
tape media cartridges are also
Tabletop
(Version 1)
5.77 in.
(14.66 cm)
(12.40 cm)
9.25 in.
(23.50 cm)
(23.01 cm)
13.08 in.
(33.22 cm)
(32.00 cm)
(14 lb., 9 oz) 6.63 kg
Tabletop
(Version 2)
4.88 in.
9.06 in.
12.60 in.
1-3