Quantum DLT 4000 Product Manual page 240

SCSI Commands
REQUEST SENSE Command (03h) (continued)
Sense Key
00
NO SENSE
01
RECOVERED ERROR
02h
NOT READY
03h
MEDIUM ERROR
* = Medium Changer specific command.
5-140
Table 5–68 Supported ASC / ASCQ in Hex
ASC ASCQ Description
00 00 No Additional Sense Code
01 Unexpected FM Encountered
02 End of Medium (EOM) Encountered
03 SetMark Encountered
04 Beginning of Medium (BOM) Encountered
05 EOD Encountered
5D 00 Tape Alert Failure Prediction Threshold Exceeded
5D FF False Exception Condition
00 17 Clean Requested (Non-Vendor Unique)
0A 00 Error Log Overflow
0A 80 Error Log Generated
37 00 Rounded Parameter
3B 08 Repositioning Error
44 C1 EEROM Copy 1 Area Bad
44 C2 EEROM Copy 2 Area Bad
47 00 SCSI Parity Error
48 00 IDE Message Received
51 00 ERASE Failure
53 01 Unload Tape Failure
5B 02 Log Counter at Maximum
80 02 Cleaning Requested
80 03 Soft Error Exceeds Threshold
04 00 Unit Not Ready, Cause Nonreportable
04 01 Unit Not Ready, Calibration in Process
04 02 Unit Not Ready, LOAD Command Needed
04 03 Unit Not Ready, Manual Intervention Needed
30 02 Incompatible Format
30 03 Unit Not Ready, Incompatible Media (Cleaning
Cartridge) Installed
3A 00 Media Not Present
3A 80 Media Not Present, VU Cartridge Missing
5A 01 Operator Media Removal Request
00 00 Medium Error
04 02 Unit Not Ready, LOAD Command Needed
0C 00 WRITE Error
11 00 Unrecovered READ Error
11 08 Unrecovered READ Error, Incomplete Block Read
14 00 Recorded Entity Not Found
15 02 Position Error Detected by Read of Medium
30 00 Cannot Read Medium
Quantum DLT 4000 Tape Drive