Product Features; Product Specifications; Physical Specifications; Table 1-1 Dlt 7000 Physical Dimensions - Quantum DLT 7000 Product Manual

General Description and Specifications
1.2

PRODUCT FEATURES

The DLT 7000 tape drive offers the following product features:
35.0 GB Native, 70.0 GB Compressed Capacity (Formatted capacity
assuming a 2:1 data compression ratio. Note that actual compression ratio
depends on the type of data, SCSI bus limitations, and system
configuration.)
Superior Error Detection and Correction
Extensive Embedded Diagnostic/Self-Test Software
Fast access to Data via Tape Mark Directory
Tape-Loadable Firmware
1.3

PRODUCT SPECIFICATIONS

The following subsections contain full specifications for the Quantum DLT 7000
tape drive. Specifications for the DLTtape
included.
1.3.1

Physical Specifications

Table 1 1 provides physical dimensions for the DLT 7000 tape system.
Description
Height
Width
Depth
Weight*
Shipping
Weight*
* depending on configuration.
Note: Mounting hole pattern for the bottom and sides of the drive is industry
standard.
1-2
Table 1 1 DLT 7000 Physical Dimensions
Integratible Version
8.26 cm (3.25 in) without front bezel;
8.64 cm (3.40 in) with front bezel.
14.48 cm (5.70 in) behind front bezel;
14.91 cm (5.87 in) with front bezel.
22.86 cm (9.00 in) measured from back
of front bezel; 24.38 cm (9.60 in)
including front bezel
2.9 kg (6 lb., 7 oz)
3.9 kg (8 lb., 8 oz)
Quantum DLT 7000 Tape System
tape media cartridges are also
Tabletop Version
12.40 cm (4.88 in)
22.86 cm (9.00 in)
32.39 cm (12.75 in)
6.6 kg (14 lb., 9 oz)
10.0 kg (22 lb.)