WMF 1500 S+ User Manual page 113

Error pattern
• Milk foam not OK
• Temperature too cold
or too hot
• Milk foam not OK
• Temperature too cold
or too hot
• The milk foam
dispensing sputters
severely
• Milk too hot
User Manual WMF 1500 S +
Messages and instructions
Action instructions
Basic Milk
™ ™ Change milk nozzle
Use a suitable milk nozzle on the combi spout.
Milk nozzle
• very cold milk (up to 8 °C)
• chilled milk (8 to 16 °C)
• non-chilled milk (above 16 °C) caramel
™ ™ Clean the combi spout
w Care w Clean the milk system manually, page 99
If error not remedied
™ ™ Use another milk nozzle from the accessories
Dynamic Milk
™ ™ Perform a quality check
This function is enabled for trained staff only.
Contact the Service department if needed.
Easy Milk
™ ™ Check whether the milk temperature is the same
as the set temperature
™ ™ Clean the combi spout
w Care w Clean the milk system manually, page 99
™ ™ Check whether the milk system has been cleaned
™ ™ Clean the milk system
w Care w Milk system cleaning overview, page 87
™ ™ Check whether the milk has been cooled
sufficiently
3 kW
green
white
113