Removing The Start Number Plate; Installing The Start Number Plate - KTM 50 SX 2019 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.16
11.17
54
R00531-11
R00530-11

Removing the start number plate

H01425-10

Installing the start number plate

H01426-10
–
1
Mount fuel hose .
–
Position the fuel tank.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Position the fuel tank breather in the steering stem.
Finishing work
–
Mount the seat. ( p. 58)
–
1
Remove screw .
–
Unhook the start number plate from the brake line and remove
it.
–
Attach the start number plate to the brake line.
–
Position the start number plate.
1
Holding lugs engage in the fender.
2
.
M6 10 Nm (7.4 lbf ft)